Polycom 1725-36082-001 manual Configuration Example CLI, AP configuration, Vlan configuration

Page 10

Configuration Guide

Configuration Example – CLI

AP configuration

To add a directly connected AP-2330 attached to port 1 on a WSS using CLI:

set port type ap 1 model 2330 poe enable

#Defines the port number on the switch that the AP is connected to, the model number of the AP and enables PoE on the switch port. Valid model numbers include the 2330, 2330A and 2330B.

set ap 1 radio 1 tx-power 10 mode enable

#Sets the channel number, transmit power and enables the 802.11g radio.

set ap 1 radio 2 channel 44 tx-power 10 mode enable

#Sets the channel number, transmit power and enables the 802.11a radio.

To add a distributed AP-2330 to a WSS using CLI:

set dap 1 serial-id stpw20kc3 model 2330

#Defines the DAP number, serial-id and model number of the AP. Valid model numbers include the 2330, 2330A and 2330B.

set dap 1 radio 1 channel 11 tx-power 10 mode enable

#Sets the channel number, transmit power and enables the 802.11g radio.

set dap 1 radio 2 channel 40 tx-power 10 mode enable

#Sets the channel number, transmit power and enables the 802.11a radio.

VLAN configuration

For security and flexibility it is recommended that voice and data be configured on separate VLANs. For this example a new VLAN named Voice with a VLAN ID 2 will be created and tagged to the uplink port 8:

set vlan 2 name Voice

#Creates a new VLAN ID and defines the name. set vlan 2 port 8 tag 2

#Assigns the VLAN to a port and specifies an 802.1Q tag value.

set igmp disable vlan Voice

# Disables IGMP on Voice VLAN.

10

PN: 1725-36082-001_G.doc

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Nortel Trademark Information Introduction Certified Product SummaryKnown Limitations Contacting Nortel Technical SupportNetwork Topology Access Point Capacity and Positioning Nortel Wlan Security Switch 2300 Series with AP-2330 Directly connected APs Connecting APsDistributed APs Command, comment, and screen text key AP configuration Configuration Example CLIVlan configuration Service profile / Ssid configuration Set service-profile Voice ssid-name VoiceRadio Profile configuration Access control listTo save the current changes to a WSS using CLI Saving changesConfiguration Example Wlan Management Software Adding a Wlan Security Switch to the Network PlanDistributed AP or Directly Connected AP Configuration Guide To configure the 802.11g Radio To configure the 802.11a Radio Network Plan Tasks panel, select Create Vlan For Vlan Name enter Voice Network Plan Tasks panel, select Igmp Service Profile / Ssid configuration Specify a Name and Ssid for the Voice Service Profile Select the Open Access check box. Click the Next button Settings for Wireless Encryption Cipher Suite Configuration Guide Nortel Wlan Security Switch 2300 Series with AP-2330 Click the Next button Nortel Wlan Security Switch 2300 Series with AP-2330 Radio Profile configuration Radio Profile Properties window, click the Radio Profile tab Configuration Guide Deploying changes Configuration Guide Example Configuration Files For Reference Only Configuration Guide Nortel Wlan Security Switch 2300 Series with AP-2330
Top Page Image Contents