Polycom 1725-36082-001 manual To configure the 802.11a Radio

Page 18

Configuration Guide

9.To configure the 802.11a Radio,

a.Select default for the Radio Profile.

b.Specify the Channel Number and Transmit Power the radio should use, as determined by the site survey performed on the facility.

10.Click the Finish button.

11.The AP has now been added to the WLAN Security Switch.

18	PN: 1725-36082-001_G.doc

Image 18

Contents Nortel Trademark Information Introduction Certified Product SummaryKnown Limitations Contacting Nortel Technical SupportNetwork Topology Access Point Capacity and Positioning Nortel Wlan Security Switch 2300 Series with AP-2330 Connecting APs Directly connected APsDistributed APs Command, comment, and screen text key Configuration Example CLI AP configurationVlan configuration Service profile / Ssid configuration Set service-profile Voice ssid-name VoiceRadio Profile configuration Access control listTo save the current changes to a WSS using CLI Saving changesConfiguration Example Wlan Management Software Adding a Wlan Security Switch to the Network PlanDistributed AP or Directly Connected AP Configuration Guide To configure the 802.11g Radio To configure the 802.11a Radio Network Plan Tasks panel, select Create Vlan For Vlan Name enter Voice Network Plan Tasks panel, select Igmp Service Profile / Ssid configuration Specify a Name and Ssid for the Voice Service Profile Select the Open Access check box. Click the Next button Settings for Wireless Encryption Cipher Suite Configuration Guide Nortel Wlan Security Switch 2300 Series with AP-2330 Click the Next button Nortel Wlan Security Switch 2300 Series with AP-2330 Radio Profile configuration Radio Profile Properties window, click the Radio Profile tab Configuration Guide Deploying changes Configuration Guide Example Configuration Files For Reference Only Configuration Guide Nortel Wlan Security Switch 2300 Series with AP-2330