TP-Link TD-W8960N manual Security, To add a new DMZ Host, IP Filtering

TD-W8960N300Mbps Wireless N ADSL2+ Modem Router User Guide

Figure 4-29

To add a new DMZ Host:

You can enter the computer's IP address and then click Save/Apply to activate the DMZ host you set on this page.

)Note:

DMZ host forwards all the ports at the same time. Any PC whose port is being forwarded must have its DHCP client function disabled and should have a new static IP Address assigned to it because its IP Address may change while using the DHCP function.

4.4.6 Security

Choose “Advanced Setup”Æ“Security”, and you will see the security screen including IP Filtering and MAC Filtering (only effective in Bridging mode) submenus.

Figure 4-30

4.4.6.1 IP Filtering

The IP address filtering feature makes it possible for administrators to control user's access to the Internet, which is based on user's IP. The IP address filtering includes Outgoing and Incoming, the detailed descriptions are provided below.

IP Filtering - Outgoing

Choose “Advanced Setup”Æ“Security”Æ“IP Filtering”Æ“Outgoing”, you can configure Outgoing Filtering rules on the screen (shown in Figure 4-31).

40