TD-W8960N 
300Mbps Wireless N ADSL2+ Modem Router User Guide
¾Enable: Check this box to enable the Traffic Control function.
¾Egress Total Rate (Kbps): Enter the upload speed through the WAN port.
¾Ingress Total Rate (Kbps): Enter the download speed through the WAN port.
¾Line
¾Line
¾Save/Apply: Click this button to make the configuration take effect.
)Note:
1)The Egress Total Rate and Ingress Total Rate are required to be configured. Otherwise TC rules cannot be added.
2)Only when the Router is configured to work in DSL connection does the Line Rate field display the upload/download speed assigned by your ISP. Otherwise there will be empty.
4.4.9.1 Traffic Control Rule
Choose “Advanced Setup”Æ“Traffic Control” Æ“Traffic Control Rule” and then you will see the screen as shown in Figure
Figure
To add a TC rule, click the Add button and you can configure it in the screen as shown in Figure
52