TP-Link TD-W8960N manual LAN Ports, IPSec

TD-W8960N300Mbps Wireless N ADSL2+ Modem Router User Guide

4.Select interfaces from the available interface list and add it to the grouped interface list using the arrow buttons to create the required mapping of the ports.

)Note:

These clients may obtain public IP addresses.

5.Click Save/Apply to make the entry effective immediately.

)Note:

If a vendor ID is configured for a specific client device, please REBOOT the client device attached to the modem to allow it to obtain an appropriate IP address.

4.4.15 LAN Ports

Choose “Advanced Setup”Æ“LAN Ports”, you can Enable/Disable the Virtual LAN Ports feature by selecting the checkbox on the screen.

Figure 4-64

4.4.16 IPSec

Choose “Advanced Setup”Æ“IPSec”, you can Add/Remove or Enable/Disable the IPSec tunnel connections on the screen as shown in Figure 4-65.

63