TP-Link TD-W8960N manual ATM-EoA-Bridging, ATM-PPPoA

TD-W8960N300Mbps Wireless N ADSL2+ Modem Router User Guide

Figure 4-19

4.4.2.3 ATM-EoA-Bridging

If you want to adopt the Bridge service and you need to use an ATM Interface, follow the steps below to add a WAN service over a selected ATM interface:

1.Add a new ATM interface and select EoA option for DSL Link Type (see 4.4.1.1 ATM interface).

2.Click the Add button on the screen Figure 4-7.Select WAN Service Interface over ATM PVC on the next screen (as shown Figure 4-8).

3.Select Bridging option for the WAN service type on the screen (as shown Figure 4-9), and click Next button to continue.

4.On the screen (as shown Figure 4-13)you will see the detailed settings you’ve made. Please click the Apply/Save button to save these settings.

4.4.2.4 ATM-PPPoA

If your ISP provides a PPPoA connection and you need to use an ATM Interface, follow the steps below to add a WAN service over a selected ATM interface:

1.Add a new ATM interface and select PPPoA option for DSL Link Type (see 4.4.1.1 ATM interface).

2.Click the Add button on the screen Figure 4-7and the next configuration is similar to PPPoE, (see section 4.4.2.1 ATM-EoA-PPPoE). The difference is that you don’t need to set the PPPoE Service Name and Bridge PPPoE Frames Between WAN and Local Ports on the screen of Figure 4-10.

30