TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide
Interval value. Its clients hear the beacons and awaken to receive the broadcast and multicast messages. The default value is 1.
¾Beacon Interval: Enter a value between
¾Transmit Power: This option will allow you to configure the wireless transmit power. High transmit power will extend the wireless signal range of the device and make the signal transmit more legible. Low transmit power with the smaller wireless signal range that will decrease the probability of interrupt by other
¾WMM
4.5.6 Station info
Choose “Wireless”Æ” Station Info”, you will see the screen of
Figure
This page shows authenticated wireless stations and their status.
¾MAC: Displays the connected wireless station's MAC address.
¾Associated: Displays whether the wireless station has associated with the access point.
¾Authorized: Displays the information of Authentication.
¾SSID: Displays the connected wireless station's SSID.
¾Interface: Displays the connected wireless station's Interface mode.
4.6 Diagnostics
Choose “Diagnostics”, you will see the Diagnostics screen. This section describes the result of the test for the ENET (Ethernet) Connection, Wireless Connection and ADSL Synchronization. You can refer to the Help menu to get more information about the corresponding test.
89