Gigabit Uplink Unmanaged Switch
Device | Min Distance (m1 |
|
|
Switch case | 1.00 |
|
|
Transformer room | 2.00 |
|
|
Elevator tower | 2.00 |
|
|
2.00 | |
|
|
3.2 Connect to Ground
Connecting the device to ground is to quickly release the lightning
In different environments, the device may be grounded differently. The following will instruct you to connect the device to the ground in two ways, connecting to the grounding bar or connecting to the ground via the power cord. Please connect the device to ground in the optimum way according to your specific operation environment.
■■ Connecting to the Grounding Bar
If the device is installed in the Equipment Room, where a grounding bar is available, you are recommended to connect the device to the grounding bar as shown in the following figure.
Switch (Rear Panel) | Grounding Terminal |
Ground Cable | Grounding Bar |
Figure 3-1 Connecting to the Grounding Bar
Note: The grounding bar and the ground cable are not provided with our product. If needed, please self purchase them.
Lightning Protection 
11