Gigabit Uplink Unmanaged Switch
CCCCCCCCCC Introduction
1111 Product Overview
TL-SL1226/TL-SL1351 Gigabit Uplink Unmanaged Switch provides you with a high- performance, low-cost, easy-to-use, seamless and standard upgrade to boost your old network to 1000Mbps. Increase the speed of your network server and backbone connections, making Gigabit connection to a server or uplinking a network necessarily.
The TP-LINK TL-SL1226/TL-SL1351 Gigabit Uplink Unmanaged Switch features a non- blocking switching architecture that forwards and filters packets at full wire-speed for maximum throughput. The switch supports MAC address auto-learning and auto-aging, IEEE802.3x flow control for Full Duplex mode and backpressure for Half Duplex mode. It is compatible with all 10Mbps, 100Mbps and 1000Mbps Ethernet devices because it is standard-based.
The TL-SL1226/TL-SL1351 Gigabit Uplink Unmanaged Switch is plug-and-play and no configuration is required. Auto MDI/MDIX cable detection on all ports eliminates the need for crossover cable or Uplink port. Each port can be used as general ports or Uplink ports, and any port can be simply plugged into a server, a hub, a router or a switch, using the straight cable or crossover cable. Diagnostic LEDs which display link status and activity allow you to quickly detect and correct problems on the network.
1111 Features
¾¾ Complies with IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3z (for TL-SL1351 only) standards
¾¾ 24/48 10/100Mbps Auto-Sense RJ45 ports supporting Auto-MDI/MDIX ¾¾ 2/2 10/100/1000Mbps Auto-Sense RJ45 ports supporting Auto-MDI/MDIX ¾¾ 1 SFP(Small Form Pluggable) module interface (For TL-SL1351 only)
¾¾ Supports Auto MDI / MDIX cable detection on all ports eliminate the need for crossover cable or Uplink port
¾¾ Non-blocking switching architecture that forwards and filters packets at full wire -speed for maximum throughput
¾¾ Supports MAC address auto-learning and auto-aging
¾¾ Supports IEEE802.3x flow control for full-duplex mode and backpressure for half- duplex transfer mode
¾¾ LED indicators for monitoring power, link, activity, speed ¾¾ Internal power supply