Gigabit Uplink Unmanaged Switch
10/100/1000Mbps Port
Designed to connect to the device with a bandwidth of 10Mbps, 100Mbps or 1000Mbps. Each has a corresponding 1000Mbps LED.
SFP Port (for TL-SL1351 Only)
Designed to install the SFP module.
■Rear Panel
The rear panel of
Figure 1-3 Rear Panel of TL-SL1226
The rear panel of
Figure 1-3 Rear Panel of TL-SL1351
Grounding Terminal
The switch already comes with lightning protection mechanism. You can also ground the switch through the PE (Protecting Earth) cable of AC cord or with Ground Cable. For detailed information, please refer to Chapter 3 Lightning Protection.
Power Socket
Connect the female connector of the power cord here, and the male connector to the AC power outlet. Please make sure the voltage of the power supply meets the requirement of the input voltage
Caution: Please use the provided power cord.
Introduction 
03