Gigabit Uplink Unmanaged Switch
Chapter 4 Connection
4.1Ethernet Port
Please connect the Ethernet ports of the switch to the networkdevices by RJ45 cable as the following figure shown.
RJ45 Port
RJ45 Cable
Figure 4-1 Connecting the RJ45 Port
4.2 SFP Port
Connect the SFP port to a SFP module. The switch could identify and configure the SFP module automatically (for
SFP Port
SFP Module
Figure 4-2 Inserting the SFP Module
4.3 Verify Installation
After completing the installation, please verify the following items:
■■
■■
■■
■■
There are 5~10cm of clearance around the sides of the device for ventilation and the air flow is adequate.
The voltage of the power supply meets the requirement of the input voltage of the device. The power socket, device and rack are well grounded.
The device is correctly connected to other network device.
Connection 
15