SETUP INSTRUCTIONS
Stereo Operation
1. Set AMP MODE switch 1 to STEREO.
2.Set the A and B channel AMP FUNCTION switches
2
and
3
to FULL RANGE.
3.Connect the Left and Right program signal to the A and B channel inputs:
4
and
5
.
4.Connect the A and B channel speaker outputs
6
and
7
to the loudspeaker full range inputs.
2
1
3
4
5
6
8 
7
Mono Bridge Mode Operation
1. Set AMP MODE switch 1 to BRIDGE.
2.Connect the Mono program signal to the A channel input
4
.
3.Connect the loudspeaker across the two RED banana posts on the amplifier outputs 5 . The A channel is positive and the B channel is negative.
Caution: The input level controls for both the A and B channels need to be set identically for the amplifier to operate properly.
Two Channel Mono—Parallel Mode (with single channel input)
1.Set AMP MODE switch
1
to PARALLEL.
2.Connect the Mono program signal to the A channel input
4
.
3.Connect the loudspeakers to both the A and B channel outputs:
6
and
7
.
13