Lindy 25030 user manual Security Manager, Click Apply

Page 30

2.Community strings serve as passwords and can be entered as one of the following:

RO: Read only. Enables requests accompanied by this string to display MIB- object information.

RW: Read write. Enables requests accompanied by this string to display MIB- object information and to set MIB objects.

3.Trap Manager A trap manager is a management station (SNMP application) that receives traps (the system alerts generated by the switch). If no trap manager is defined, no traps are issued. Create a trap manager by entering the IP address of the station and a community string.

2.4.11 Security Manager

This page allows you to change the user name and password for administration of the switch.

1.User name: Type the new user name.

2.Password: Type the new password.

3.Reconfirm password: Retype the new password.

4.Click Apply.

- 29 -

Image 30

Contents 24 + 2 Giga Snmp Ethernet Switch Contents Page Installation UnpackingPower On the Switch Desktop or Shelf InstallationRack Installation LED indicators informationInitial set up for management Out-of-Band Terminal Mode ConfigurationModify Switch’s IP address via Out-of-Band method In-band management through EthernetGateway Modify Network Adapter’s IP address Telnet IP Address of Switch Telnet managementWeb Management Function Web Management Home OverviewPort status Port Statistics and Status Popup Window Port StatisticsAdministrator IP Address/Subnet Mask/GatewaySwitch Settings 2.4.2.1 Basic Module InfoMiscellaneous Setting Priority Queue Service settings 802.1pAdvanced Console Port Information Port Controls Flow controlAggregator setting TrunkingAggregator Information State Activity Filter Database 2.4.6.1 Igmp SnoopingStatic MAC Address Message Description QueryVlan configuration MAC filteringSupport Port-based Vlan Support Tag-based Vlan Ieee 802.1Q Vlan Support Protocol-based VlanPort Based Vlan 7.2 802.1Q VlanBasic Port VID Pvid Port VID Configure port VID settingsSpanning Tree Ingress FilteringPage Port Sniffer Port Mirroring SNMP/Trap Manager Security Manager Click Apply12 802.1x Configuration System ConfigurationPerport Configuration Tftp Update Firmware Misc ConfigurationConfiguration Backup Tftp Restore Configuration Tftp Backup ConfigurationReset System RebootConsole -- 1K Xmodem update firmware Page Out-of-band Terminal mode management Main MenuSwitch Static Configuration Control KeysPort Configuration Trunk Configuration Vlan Configure Create a Vlan Group Create a Port-Based VlanGroups Sorted Mode Edit / Delete a Vlan GroupMisc Configuration MAC Age Interval Max Bridge transmit delay bound Broadcast Storm FilteringPort Security Collision’s Retry ForeverAdministration Configuration Port Mirroring ConfigurationChange Username Change Password Priority Configuration 7.2 802.1p Priority Configuration Port Static PriorityMAC Address Configuration Static MAC Address Add static MAC address -ActionsEdit static MAC address -Actions Press Edit key Delete static MAC address -Actions Filtering MAC Address Add filter MAC address -ActionsEdit filter MAC address Protocol Related Configuration Delete filter MAC address ActionsSTP Enable 1 STPSTP System Configuration Perport ConfigurationsSnmp System OptionsCommunity Strings Add Community NameEdit Community Name EnterDelete Community Name Trap Managers Add Snmp trap managerEdit trap managers Delete trap managerGvrp IgmpWorking Port Setting Lacp Link Aggregation Control ProtocolLacp Status Static trunk group6 802.1x Protocol Lacp trunk group6.1 802.1x Enable 6.2 802.1x System Configuration 6.3 802.1x Misc Configuration Status and CountersPort Counters Reboot Switch System InformationDefault RestartRestore Configure File Backup Configure File Vlan applications used with switch Application ExamplesTrunking Applications used with the switch FCC Compliance Statement United States Canadian Department of Communications RFI statement