Lindy 25030 user manual Port Configuration

Page 39

4.2.1 Port Configuration

Edit / View the port configuration.

1.InRate (100K/unit):

0:disable rate control.

1~1000: valid rate value.

2.OutRate (100K/unit):

0:disable rate control.

1~1000: valid rate value.

3.Enabled:

Enables or Disables this port in the switch. “Yes” = Enable.

“No” = Disable.

4.Auto:

Define Auto negotiation mode. Options: “Auto”, “Nway_Force”, “Force”

Spd/Dpx:

Define the port speed and Duplex.

5.Flow Control:

Full: Enables or Disables Full Duplex flow control

Half: Enables or Disables Half Duplex flow control. (Backpressure)

- 38 -

Image 39

Contents 24 + 2 Giga Snmp Ethernet Switch Contents Page Unpacking InstallationLED indicators information Desktop or Shelf InstallationRack Installation Power On the SwitchOut-of-Band Terminal Mode Configuration Initial set up for managementModify Switch’s IP address via Out-of-Band method In-band management through EthernetGateway Modify Network Adapter’s IP address Telnet management Telnet IP Address of SwitchWeb Management Home Overview Web Management FunctionPort status Port Statistics Port Statistics and Status Popup WindowIP Address/Subnet Mask/Gateway AdministratorModule Info Switch Settings 2.4.2.1 BasicMiscellaneous Setting Priority Queue Service settings 802.1pAdvanced Console Port Information Flow control Port ControlsTrunking Aggregator settingAggregator Information Filter Database 2.4.6.1 Igmp Snooping State ActivityMessage Description Query Static MAC AddressVlan configuration MAC filteringSupport Port-based Vlan Support Protocol-based Vlan Support Tag-based Vlan Ieee 802.1Q Vlan7.2 802.1Q Vlan Port Based VlanBasic Ingress Filtering Port VID Configure port VID settingsSpanning Tree Port VID PvidPage Port Sniffer Port Mirroring SNMP/Trap Manager Click Apply Security Manager12 802.1x Configuration System ConfigurationPerport Configuration Misc Configuration Tftp Update FirmwareTftp Backup Configuration Configuration Backup Tftp Restore ConfigurationReboot Reset SystemConsole -- 1K Xmodem update firmware Page Main Menu Out-of-band Terminal mode managementControl Keys Switch Static ConfigurationPort Configuration Trunk Configuration Vlan Configure Create a Port-Based Vlan Create a Vlan GroupEdit / Delete a Vlan Group Groups Sorted ModeMisc Configuration MAC Age Interval Broadcast Storm Filtering Max Bridge transmit delay boundCollision’s Retry Forever Port SecurityAdministration Configuration Port Mirroring ConfigurationChange Username Change Password Priority Configuration Port Static Priority 7.2 802.1p Priority ConfigurationAdd static MAC address -Actions MAC Address Configuration Static MAC AddressEdit static MAC address -Actions Press Edit key Delete static MAC address -Actions Add filter MAC address -Actions Filtering MAC AddressEdit filter MAC address Delete filter MAC address Actions Protocol Related Configuration1 STP STP EnablePerport Configurations STP System ConfigurationSystem Options SnmpAdd Community Name Community StringsEdit Community Name EnterDelete Community Name Add Snmp trap manager Trap ManagersDelete trap manager Edit trap managersIgmp GvrpLacp Link Aggregation Control Protocol Working Port SettingStatic trunk group Lacp StatusLacp trunk group 6 802.1x Protocol6.1 802.1x Enable 6.2 802.1x System Configuration Status and Counters 6.3 802.1x Misc ConfigurationPort Counters System Information Reboot SwitchRestart DefaultRestore Configure File Backup Configure File Application Examples Vlan applications used with switchTrunking Applications used with the switch Canadian Department of Communications RFI statement FCC Compliance Statement United States