4.2.5 Administration Configuration
Configure the following options.
•Change Username
•Change Password
•Device Information (name, description, location, content)
•IP Configuration (IP address, Mask, Gateway)
4.2.6 Port Mirroring Configuration
The Port Sniffer is used to monitor traffic in a switched network. Traffic passed through ports can be monitored by one specific port. i.e. Traffic inbound or outbound on a monitored port will be duplicated into the configured sniffer port
1.Sniffer Mode: Press Space key to set sniffer mode Disable, Rx, Tx or Both.
2.Monitoring Port (Analysis Port): Use this option to select the destination port for monitored traffic. This is the port that your network analyser would be connected to.
3.Monitored Port: Based on the Sniffer Mode selection made previously, traffic from the selected port will be mirrored onto the Analysis port. A maximum of 25 monitored ports can be configured. Press Space key to choose member port, “V”
– is the member,
- 46 -