Lindy 25030 user manual 6.3 802.1x Misc Configuration, Status and Counters

Page 68

4.3.6.3 802.1x Misc Configuration

1.Quiet Period: Used to define periods of time during which it will not attempt to acquire a supplicant (Default time is 60 seconds).

2.Tx Period: Used to determine when an EAPOL PDU is to be transmitted (Default value is 30 seconds).

3.Supplicant Timeout : Used to determine timeout conditions in the exchanges between the supplicant and authentication server (Default value is 30 seconds).

4.Server Timeout: Used to determine timeout conditions in the exchanges between the authenticator and authentication server (Default value is 30 seconds).

5.ReAuthMax: Used to determine the number of re-authentication attempts that are permitted before the specific port becomes unauthorized (Default value is 2 times).

6.Reauth Period: Used to determine a nonzero number of seconds between periodic re-authentication of the supplications (Default value is 3600 seconds).

4.4 Status and Counters

- 67 -

Image 68

Contents 24 + 2 Giga Snmp Ethernet Switch Contents Page Installation UnpackingDesktop or Shelf Installation Rack InstallationPower On the Switch LED indicators informationInitial set up for management Out-of-Band Terminal Mode ConfigurationGateway Modify Switch’s IP address via Out-of-Band methodIn-band management through Ethernet Modify Network Adapter’s IP address Telnet IP Address of Switch Telnet managementWeb Management Function Web Management Home OverviewPort status Port Statistics and Status Popup Window Port StatisticsAdministrator IP Address/Subnet Mask/GatewaySwitch Settings 2.4.2.1 Basic Module InfoAdvanced Miscellaneous SettingPriority Queue Service settings 802.1p Console Port Information Port Controls Flow controlAggregator setting TrunkingAggregator Information State Activity Filter Database 2.4.6.1 Igmp SnoopingStatic MAC Address Message Description QuerySupport Port-based Vlan Vlan configurationMAC filtering Support Tag-based Vlan Ieee 802.1Q Vlan Support Protocol-based VlanPort Based Vlan 7.2 802.1Q VlanBasic Port VID Configure port VID settings Spanning TreePort VID Pvid Ingress FilteringPage Port Sniffer Port Mirroring SNMP/Trap Manager Security Manager Click ApplyPerport Configuration 12 802.1x ConfigurationSystem Configuration Tftp Update Firmware Misc ConfigurationConfiguration Backup Tftp Restore Configuration Tftp Backup ConfigurationReset System RebootConsole -- 1K Xmodem update firmware Page Out-of-band Terminal mode management Main MenuSwitch Static Configuration Control KeysPort Configuration Trunk Configuration Vlan Configure Create a Vlan Group Create a Port-Based VlanGroups Sorted Mode Edit / Delete a Vlan GroupMisc Configuration MAC Age Interval Max Bridge transmit delay bound Broadcast Storm FilteringPort Security Collision’s Retry ForeverChange Username Change Password Administration ConfigurationPort Mirroring Configuration Priority Configuration 7.2 802.1p Priority Configuration Port Static PriorityMAC Address Configuration Static MAC Address Add static MAC address -ActionsEdit static MAC address -Actions Press Edit key Delete static MAC address -Actions Filtering MAC Address Add filter MAC address -ActionsEdit filter MAC address Protocol Related Configuration Delete filter MAC address ActionsSTP Enable 1 STPSTP System Configuration Perport ConfigurationsSnmp System OptionsCommunity Strings Add Community NameDelete Community Name Edit Community NameEnter Trap Managers Add Snmp trap managerEdit trap managers Delete trap managerGvrp IgmpWorking Port Setting Lacp Link Aggregation Control ProtocolLacp Status Static trunk group6 802.1x Protocol Lacp trunk group6.1 802.1x Enable 6.2 802.1x System Configuration 6.3 802.1x Misc Configuration Status and CountersPort Counters Reboot Switch System InformationDefault RestartRestore Configure File Backup Configure File Vlan applications used with switch Application ExamplesTrunking Applications used with the switch FCC Compliance Statement United States Canadian Department of Communications RFI statement