Lindy 25030 user manual Aggregator Information

Page 19

4.Work ports: Allows a maximum of four ports to be aggregated at the same time. If the group is defined as a LACP static trunking group, then any extra ports selected are placed in a standby mode for redundancy if one of the other ports fails. If the group is defined as a local static trunking group, then the number of ports must be the same as the group member ports.

NOTE: If LACP is enabled, you can configure LACP Active/Passive status in each port on State Activity page.

2.4.5.2 Aggregator Information

This page displays a summary report on the current LACP aggregator status.

1.In this example there is no group active. LACP is not operational.

2.In this example there are 2 Static Trunking groups.

3.In this example there is an active LACP trunking group.

- 18 -

Image 19
Contents 24 + 2 Giga Snmp Ethernet Switch Contents Page Unpacking InstallationLED indicators information Desktop or Shelf InstallationRack Installation Power On the SwitchOut-of-Band Terminal Mode Configuration Initial set up for managementIn-band management through Ethernet Modify Switch’s IP address via Out-of-Band methodGateway Modify Network Adapter’s IP address Telnet management Telnet IP Address of SwitchWeb Management Home Overview Web Management FunctionPort status Port Statistics Port Statistics and Status Popup WindowIP Address/Subnet Mask/Gateway AdministratorModule Info Switch Settings 2.4.2.1 BasicPriority Queue Service settings 802.1p Miscellaneous SettingAdvanced Console Port Information Flow control Port ControlsTrunking Aggregator settingAggregator Information Filter Database 2.4.6.1 Igmp Snooping State ActivityMessage Description Query Static MAC AddressMAC filtering Vlan configurationSupport Port-based Vlan Support Protocol-based Vlan Support Tag-based Vlan Ieee 802.1Q Vlan7.2 802.1Q Vlan Port Based VlanBasic Ingress Filtering Port VID Configure port VID settingsSpanning Tree Port VID PvidPage Port Sniffer Port Mirroring SNMP/Trap Manager Click Apply Security ManagerSystem Configuration 12 802.1x ConfigurationPerport Configuration Misc Configuration Tftp Update FirmwareTftp Backup Configuration Configuration Backup Tftp Restore ConfigurationReboot Reset SystemConsole -- 1K Xmodem update firmware Page Main Menu Out-of-band Terminal mode managementControl Keys Switch Static ConfigurationPort Configuration Trunk Configuration Vlan Configure Create a Port-Based Vlan Create a Vlan GroupEdit / Delete a Vlan Group Groups Sorted ModeMisc Configuration MAC Age Interval Broadcast Storm Filtering Max Bridge transmit delay boundCollision’s Retry Forever Port SecurityPort Mirroring Configuration Administration ConfigurationChange Username Change Password Priority Configuration Port Static Priority 7.2 802.1p Priority ConfigurationAdd static MAC address -Actions MAC Address Configuration Static MAC AddressEdit static MAC address -Actions Press Edit key Delete static MAC address -Actions Add filter MAC address -Actions Filtering MAC AddressEdit filter MAC address Delete filter MAC address Actions Protocol Related Configuration1 STP STP EnablePerport Configurations STP System ConfigurationSystem Options SnmpAdd Community Name Community StringsEnter Edit Community NameDelete Community Name Add Snmp trap manager Trap ManagersDelete trap manager Edit trap managersIgmp GvrpLacp Link Aggregation Control Protocol Working Port SettingStatic trunk group Lacp StatusLacp trunk group 6 802.1x Protocol6.1 802.1x Enable 6.2 802.1x System Configuration Status and Counters 6.3 802.1x Misc ConfigurationPort Counters System Information Reboot SwitchRestart DefaultRestore Configure File Backup Configure File Application Examples Vlan applications used with switchTrunking Applications used with the switch Canadian Department of Communications RFI statement FCC Compliance Statement United States