UNPACKING and INSTALLATION INSTRUCTIONS
Please refer to the Treadmill Unpacking & Installation Instructions that shipped with the treadmill. These instructions provide information regarding receiving your order, site requirements, unpacking and installation steps, and testing the treadmill and controller.
The treadmill and controller must be installed correctly before being used. StairMaster® recommends that you contact your treadmill dealer or sales representative when your equipment arrives. The representative will help unpack, install, and demonstrate it, to ensure that:
•The equipment is free from shipping damage.
•The treadmill is connected correctly to the appropriate AC power source.
•Installation and operation are in accordance with StairMaster standards.
Incorrect installation by unauthorized personnel can lead to equipment damage and may void the warranty.
WARNING
THE TREADMILL MUST BE ON A DEDICATED BRANCH CIRCUIT. NO OTHER DEVICE SHOULD BE CONNECTED TO THAT CIRCUIT.
EXCESSIVE RISK CURRENT (LEAKAGE) CAN RESULT IF THE EQUIPMENT IS NOT
PROPERLY GROUNDED.
FAILURE TO FOLLOW THESE GUIDELINES WILL PRODUCE A SERIOUS OR POSSIBLY
FATAL ELECTRICAL SHOCK HAZARD.
CONSULT A QUALIFIED ELECTRICIAN AS REQUIRED.
Accessories and Options
An operator manual (P/N 27483) is shipped with each treadmill. The following options are available:
Part No. | Description |
Left Handrail Kit | |
Right Handrail Kit | |
Left and Right Handrails | |
Transmitter Belt with strap (HRM) |
•To avoid potential safety and electrical problems, use parts and accessories that meet StairMaster specifications.
How to Reach Us
For Technical Assistance / Parts:
North America: | |
International: |
See addresses and phone numbers listed at the end of this manual.
7
