Lindy 25030 user manual Port status

Page 11

2.2. Port status

This page displays the current status of every port. It will display the users selection for each port followed by the actual discovered settings.

1.State: Display port status: On or Off, Off indicates port is disabled.

2.Link Status: Down indicates “No Link”, Up indicates “Link”.

3.Auto Negotiation: Display the auto negotiation mode: Auto/Force/Nway-forced.

4.Speed Status: Displays 1000Mbps, 100Mbps or 10Mbps speeds.

Note: port 1- 24 are 10/100Mbps, Port 25-26 are 10/100/1000Mbps.

5.Duplex Status: Displays full-duplex or half-duplex mode.

6.Flow Control: Full: Displays flow control status in Full Duplex mode. Half: Displays flow control status in Half Duplex mode.

7.Rate Control: Displays the current rate control setting of the selected port. Ingr: Display the effective port ingress rate as defined by the user.

Egr: Display the effective port egress rate as defined by the user.

8.Port Security: Displays the status of port security.

9.Config: (configured) Displays the state defined by the user.

10.Atual: (actual) Displays the negotiation result.

- 10 -

Image 11

Contents 24 + 2 Giga Snmp Ethernet Switch Contents Page Unpacking InstallationLED indicators information Desktop or Shelf InstallationRack Installation Power On the SwitchOut-of-Band Terminal Mode Configuration Initial set up for managementGateway Modify Switch’s IP address via Out-of-Band methodIn-band management through Ethernet Modify Network Adapter’s IP address Telnet management Telnet IP Address of SwitchWeb Management Home Overview Web Management FunctionPort status Port Statistics Port Statistics and Status Popup WindowIP Address/Subnet Mask/Gateway AdministratorModule Info Switch Settings 2.4.2.1 BasicAdvanced Miscellaneous SettingPriority Queue Service settings 802.1p Console Port Information Flow control Port ControlsTrunking Aggregator settingAggregator Information Filter Database 2.4.6.1 Igmp Snooping State ActivityMessage Description Query Static MAC AddressSupport Port-based Vlan Vlan configurationMAC filtering Support Protocol-based Vlan Support Tag-based Vlan Ieee 802.1Q Vlan7.2 802.1Q Vlan Port Based VlanBasic Ingress Filtering Port VID Configure port VID settingsSpanning Tree Port VID PvidPage Port Sniffer Port Mirroring SNMP/Trap Manager Click Apply Security ManagerPerport Configuration 12 802.1x ConfigurationSystem Configuration Misc Configuration Tftp Update FirmwareTftp Backup Configuration Configuration Backup Tftp Restore ConfigurationReboot Reset SystemConsole -- 1K Xmodem update firmware Page Main Menu Out-of-band Terminal mode managementControl Keys Switch Static ConfigurationPort Configuration Trunk Configuration Vlan Configure Create a Port-Based Vlan Create a Vlan GroupEdit / Delete a Vlan Group Groups Sorted ModeMisc Configuration MAC Age Interval Broadcast Storm Filtering Max Bridge transmit delay boundCollision’s Retry Forever Port SecurityChange Username Change Password Administration ConfigurationPort Mirroring Configuration Priority Configuration Port Static Priority 7.2 802.1p Priority ConfigurationAdd static MAC address -Actions MAC Address Configuration Static MAC AddressEdit static MAC address -Actions Press Edit key Delete static MAC address -Actions Add filter MAC address -Actions Filtering MAC AddressEdit filter MAC address Delete filter MAC address Actions Protocol Related Configuration1 STP STP EnablePerport Configurations STP System ConfigurationSystem Options SnmpAdd Community Name Community StringsDelete Community Name Edit Community NameEnter Add Snmp trap manager Trap ManagersDelete trap manager Edit trap managersIgmp GvrpLacp Link Aggregation Control Protocol Working Port SettingStatic trunk group Lacp StatusLacp trunk group 6 802.1x Protocol6.1 802.1x Enable 6.2 802.1x System Configuration Status and Counters 6.3 802.1x Misc ConfigurationPort Counters System Information Reboot SwitchRestart DefaultRestore Configure File Backup Configure File Application Examples Vlan applications used with switchTrunking Applications used with the switch Canadian Department of Communications RFI statement FCC Compliance Statement United States