Lindy 25030 user manual STP System Configuration, Perport Configurations

Page 57

4.3.1.2 STP System Configuration

<-Actions->

1.Root Bridge information is displayed on the Left.

2.Parameters can be defined on the Right.

NOTE: The parameters are described in more detail in sections 2-4-8.

4.3.1.3 Perport Configurations

<-Actions->

1.PortState: Displays the spanning tree status for each port. Forwarding or Blocking.

2.PathCost: Specifies the path cost for the port. This is used in determining which ports are used as forwarding ports.

3.Priority: This defines the port priority. Low values are more likely to become the root port.

-56 -

Image 57

Contents 24 + 2 Giga Snmp Ethernet Switch Contents Page Unpacking InstallationRack Installation Desktop or Shelf InstallationPower On the Switch LED indicators informationOut-of-Band Terminal Mode Configuration Initial set up for managementModify Switch’s IP address via Out-of-Band method In-band management through EthernetGateway Modify Network Adapter’s IP address Telnet management Telnet IP Address of SwitchWeb Management Home Overview Web Management FunctionPort status Port Statistics Port Statistics and Status Popup WindowIP Address/Subnet Mask/Gateway AdministratorModule Info Switch Settings 2.4.2.1 BasicMiscellaneous Setting Priority Queue Service settings 802.1pAdvanced Console Port Information Flow control Port ControlsTrunking Aggregator settingAggregator Information Filter Database 2.4.6.1 Igmp Snooping State ActivityMessage Description Query Static MAC AddressVlan configuration MAC filteringSupport Port-based Vlan Support Protocol-based Vlan Support Tag-based Vlan Ieee 802.1Q Vlan7.2 802.1Q Vlan Port Based VlanBasic Spanning Tree Port VID Configure port VID settingsPort VID Pvid Ingress FilteringPage Port Sniffer Port Mirroring SNMP/Trap Manager Click Apply Security Manager12 802.1x Configuration System ConfigurationPerport Configuration Misc Configuration Tftp Update FirmwareTftp Backup Configuration Configuration Backup Tftp Restore ConfigurationReboot Reset SystemConsole -- 1K Xmodem update firmware Page Main Menu Out-of-band Terminal mode managementControl Keys Switch Static ConfigurationPort Configuration Trunk Configuration Vlan Configure Create a Port-Based Vlan Create a Vlan GroupEdit / Delete a Vlan Group Groups Sorted ModeMisc Configuration MAC Age Interval Broadcast Storm Filtering Max Bridge transmit delay boundCollision’s Retry Forever Port SecurityAdministration Configuration Port Mirroring ConfigurationChange Username Change Password Priority Configuration Port Static Priority 7.2 802.1p Priority ConfigurationAdd static MAC address -Actions MAC Address Configuration Static MAC AddressEdit static MAC address -Actions Press Edit key Delete static MAC address -Actions Add filter MAC address -Actions Filtering MAC AddressEdit filter MAC address Delete filter MAC address Actions Protocol Related Configuration1 STP STP EnablePerport Configurations STP System ConfigurationSystem Options SnmpAdd Community Name Community StringsEdit Community Name EnterDelete Community Name Add Snmp trap manager Trap ManagersDelete trap manager Edit trap managersIgmp GvrpLacp Link Aggregation Control Protocol Working Port SettingStatic trunk group Lacp StatusLacp trunk group 6 802.1x Protocol6.1 802.1x Enable 6.2 802.1x System Configuration Status and Counters 6.3 802.1x Misc ConfigurationPort Counters System Information Reboot SwitchRestart DefaultRestore Configure File Backup Configure File Application Examples Vlan applications used with switchTrunking Applications used with the switch Canadian Department of Communications RFI statement FCC Compliance Statement United States