Lindy 25030 MAC Address Configuration Static MAC Address, Add static MAC address -Actions

Page 50

4.2.8. MAC Address Configuration

4.2.8.1 Static MAC Address

When you add a static MAC address, it remains in the switch's address table, regardless of whether the device is physically connected to the switch. This saves the switch from having to re-learn a device's MAC address after it has been disconnected or powered-off from the network, and then reconnected at some time later.

•Add static MAC address <-Actions->

1. In the MAC address box, enter the MAC address to and from which the port should permanently forward traffic, regardless of the devices network state.

2. Press the Space key to select the Port Number

-49 -

Image 50

Contents 24 + 2 Giga Snmp Ethernet Switch Contents Page Installation UnpackingPower On the Switch Desktop or Shelf InstallationRack Installation LED indicators informationInitial set up for management Out-of-Band Terminal Mode ConfigurationGateway Modify Switch’s IP address via Out-of-Band methodIn-band management through Ethernet Modify Network Adapter’s IP address Telnet IP Address of Switch Telnet managementWeb Management Function Web Management Home OverviewPort status Port Statistics and Status Popup Window Port StatisticsAdministrator IP Address/Subnet Mask/GatewaySwitch Settings 2.4.2.1 Basic Module InfoAdvanced Miscellaneous SettingPriority Queue Service settings 802.1p Console Port Information Port Controls Flow controlAggregator setting TrunkingAggregator Information State Activity Filter Database 2.4.6.1 Igmp SnoopingStatic MAC Address Message Description QuerySupport Port-based Vlan Vlan configurationMAC filtering Support Tag-based Vlan Ieee 802.1Q Vlan Support Protocol-based VlanPort Based Vlan 7.2 802.1Q VlanBasic Port VID Pvid Port VID Configure port VID settingsSpanning Tree Ingress FilteringPage Port Sniffer Port Mirroring SNMP/Trap Manager Security Manager Click ApplyPerport Configuration 12 802.1x ConfigurationSystem Configuration Tftp Update Firmware Misc ConfigurationConfiguration Backup Tftp Restore Configuration Tftp Backup ConfigurationReset System RebootConsole -- 1K Xmodem update firmware Page Out-of-band Terminal mode management Main MenuSwitch Static Configuration Control KeysPort Configuration Trunk Configuration Vlan Configure Create a Vlan Group Create a Port-Based VlanGroups Sorted Mode Edit / Delete a Vlan GroupMisc Configuration MAC Age Interval Max Bridge transmit delay bound Broadcast Storm FilteringPort Security Collision’s Retry ForeverChange Username Change Password Administration ConfigurationPort Mirroring Configuration Priority Configuration 7.2 802.1p Priority Configuration Port Static PriorityMAC Address Configuration Static MAC Address Add static MAC address -ActionsEdit static MAC address -Actions Press Edit key Delete static MAC address -Actions Filtering MAC Address Add filter MAC address -ActionsEdit filter MAC address Protocol Related Configuration Delete filter MAC address ActionsSTP Enable 1 STPSTP System Configuration Perport ConfigurationsSnmp System OptionsCommunity Strings Add Community NameDelete Community Name Edit Community NameEnter Trap Managers Add Snmp trap managerEdit trap managers Delete trap managerGvrp IgmpWorking Port Setting Lacp Link Aggregation Control ProtocolLacp Status Static trunk group6 802.1x Protocol Lacp trunk group6.1 802.1x Enable 6.2 802.1x System Configuration 6.3 802.1x Misc Configuration Status and CountersPort Counters Reboot Switch System InformationDefault RestartRestore Configure File Backup Configure File Vlan applications used with switch Application ExamplesTrunking Applications used with the switch FCC Compliance Statement United States Canadian Department of Communications RFI statement