IOGear GCS138 installation manual F6 Set, Setti ng Functi on

Page 36

Function Keys

F6 Set:

When you press [F6] an OSD configuration submenu opens. To change a setting, move the highlight bar to the choice you want, then press [Enter]. On the submenu that appears next, move the highlight bar to the choice you want and press [Enter]. An icon of a pointing finger indicates which choice is the currently selected one.

An explanation of the choices is given in the table (right):

Setti ng

Functi on

Channel Display Duration

Determines how long a Port ID is displayed for. There are two choices: 3 seconds - which displays the Port ID for 3

 

seconds after a port change has taken place; and Always On - which displays the Port ID at all times.

 

 

Channel Display Postition

Allows you to position where the Port ID is shown on the screen. After you highlight this item an press [Enter], the

 

menu disappears and the Port ID is displayed. Use the Arrow Keys, Pg Up, Pg Dn, Home, to position the Port ID

 

display, then press [Enter] to lock the position and return to the Set submenu.

 

 

Channel Display Mode

Select how the Port ID is displayed. There are three choices: the Number plug the Name (PN + NAME); the Number

 

alone (PN); or the Name alone (Name).

 

 

Scan Duration

Determines how long the display pauses on each port when it cycles through the selected ports in Quick View Scan

 

Mode. The available options are: 3, 5,10,15, 20,30, 40, and 60 seconds.

 

 

Clear the Name List

Clears all Port Names from the Name List. You are asked to confirm before the procedure goes on. Key in Y, then

 

press [ Enter] to confirm. While the names are being cleared, a message appears on the display to indicate so. After

 

the names have been cleared, another message appears to indicate that the procedure completed successfully.

 

 

32

Image 36
Contents MiniView Ultra IOGEAR. All Rights Reserved Page Page Table of Contents Package Contents Overview OverviewFeatures FeaturesRequirements RequirementsConsole Requirements Introduction Introduction on MiniViewTM UltraPort Selection Switches Front ViewPort LEDs MiniViewTM Ultra Reset Power LEDSound Opening Power Jack Back ViewConsole Port Section Introduction Installation Setup and Installation Power AdapterStep Power Adapter Connection Setup and Installation Console Port Connection on KVM Switch Step Console ConnectionSetup and Installation CPU Port Connection on KVM Switch Step CPU Port ConnectionSetup and Installation Port Connections on back of Computer Step Connecting the PCsSetup and Installation Cascading MiniViewTM Ultra Step Cascading MiniViewTM Ultra UnitsCongratulations! You have now completed the installation Step CascadingCascading Diagram Cascading in pyramid formatStep Cascading In Pyramid format OSD Operation OSD OperationOSD Main Menu Headings NameWhen you key in the Port ID, note the following HotKey NavigationAccess authorization Setting a passwordPower Off Power Off and RestartingHot Plugging Hot Plugging CPU PortsHot Plugging Console Ports Port ID Numbering Port Selection HotKey In ExamplesPort Selection Hotkey SummaryTable ManualQuick View Scanning HotKeyFunction Keys Function KeysF1 GoTo F2 ScanF3 List Choice MeaningF4 QV To select/deselect a portF5 Edit F6 Set Setti ng Functi onSetti ng Func ti on PC Connection Table MiniView Ultra PC Connection TableTroubleshooting Model GCS138 AppendixPressing the Hot Keys gets No responseTurn of all MiniViewTM Ultra units and wait five Specification Product Specification Model GCS138Resolution Operating TemperatureStorage Temperature HousingRadio & TV Interference Statement Radio & TV Interference StatementLimited Warranty Limited WarrantyPage Contact info