Dukane 9060 user manual Introduction Remote Control Features

15

16

18

19

23

1. Introduction

v Remote Control Features

	OFF	POWER	ON
2
			MENU
5	-	+	ADDRESS
BS			ENTER
6	ADJUST		IMAGE
7
			PROJECTOR
PICTURE WHITE BAL.
	ABC	DEF	GHI
	1	2	3
	JKL	MNO	PQR
9	4	5	6
	STU	VWX	YZ/

7 8 9

10,. UNDO CANCEL

0

12

TEST INFO. HELP

13

POSITION PIXEL AUTO 17 LENS

SHUTTERMUTE

20

PICTURE SOUND OSD

KEYSTONE AMPLITUDE ENTRYLIST

21R G B

22	MAGNIFY
	+
+
24
-	-
FOCUS	ZOOM

26 LENS CTL

1. POWER ON

	Press and hold this button for a minimum of two seconds to
	turn on the projector when the main power is supplied and the
	projector is in standby mode or idle mode.
	2. POWER OFF
	Press and hold this button for a minimum of two seconds to
	turn off the projector.
1	3. MENU
	Press to display the main menu.
3	While pressing and holding CTL, press this button to display
	the Remote Control ID dialog box to specify the remote control
	ID. See page 7-2.
4	4. ENTER
	Executes the menu selection and activates items selected from
	the menu. When the slider or dialog box is displayed:

8	Pressing this button confirms adjustments/setting and returns
	to the previous menu display.

5.Select (Up/Down/Left/Right)

￿￿: Use these buttons to select the menu of the item you wish to adjust.

When no menus appear, these buttons work as a volume control.

￿￿: Use these buttons to change the level of a selected

menu item.

A press of the ￿ button executes the selection.

11

Pressing and holding CTL, then pressing ￿ button works as a

14 Back Space key in the entry screen.

Pressing and holding CTL, then pressing this button moves the menu, slider, toolbar or dialog box.

6. ADJUST WHITE BAL.

Press to display the Picture Management screen.

7. ADJUST PICTURE

Press to display the Picture adjustment screen. Pressing this button sequentially selects adjustment screens.

8.IMAGE/PROJECTOR

Press to display the Image Option screen. Pressing this button

sequentially selects Image Options screens.

25 While pressing and holding CTL, pressing this button rotates Projector Options screens.

9.Source / Input

Press to select input or to name a signal.

1Selects RGB 1 input.

2Selects RGB 2 input.

3Selects DVI (DIGITAL) input.

4Selects VIDEO input.

5Selects S-VIDEO input.

6Selects Viewer input

7Selects LAN input

8Selects OPTION SLOT 1* (available for optional SDI board)

9Selects OPTION SLOT 2* (available for optional SDI board)

0Sequentially selects: RGB1 (VIDEO) → RGB1 (S-VIDEO) .

*This button toggles between input 1 and 2.

NOTE: While pressing and holding CTL, pressing this button switches to the selected signal found in the Entry List.

1-10