5. Using the Viewer
NOTE:
•To use the Viewer, first you need to create presentation materials on your PC using the Dynamic Image Utility 2.0 contained on the supplied Projector User Supportware
•Selecting Viewer sets the audio input for DVI input.
z Making the Most out of the Viewer Function
Features
You can view presentation data, capture (9060), and play images on the projector. A PC card is used to view presentation data prepared on the computer and to capture and play images projected with the projector.
The Viewer feature allows you to view slides stored on a PC memory card (referred to as PC card in this manual) on the pro- jector. Even if no computer is available, presentations can be conducted simply with the projector. This feature is convenient for holding presentations at meetings and in offices, as well as for playing images taken on digital cameras.
Easy to use
•Presentations can be started immediately simply by inserting a PC card (not supplied)
•Easy slide switching
•Remote control operation
•Jumping to list of slides or any specific slide
High quality images
•High resolution up to 1024 x 768 dots
•
•Viewing of digital camera images
Simple utility software (for computer)
•Dynamic Image Utility 2.0 operable on Windows 98/Me/XP/2000
•Slides can be created by capturing the currently displayed image
•Control screen for displaying lists of slides and editing
*Microsoft, Windows and PowerPoint are registered trademarks of Microsoft Corporation.
Inserting and Removing a PC Card
NOTE:
• Do not try to force the PC card into the slot.
2
PC CARD | 1 |
|
|
|
|
NOTE: When using two PC cards, do not insert both PC cards into the two PC card slots simultaneously. Doing so may cause projector malfunction such as shutting down. Each PC card must be inserted slowly one at a time.
Inserting the PC Card
•Hold the PC card horizontally and insert it slowly into PC card slot 1 or 2 with its top facing up.
PC card (not supplied)
USB( |
|
|
|
|
MOUSE/HUB) | U |
|
|
|
| SB(PC) |
| 2 | |
|
|
| PC | CARD |
|
|
|
| |
PC | CON | TROL |
| 1 |
|
| |||
|
|
|
| |
| IN |
|
| LAN |
|
|
|
|
SC | OUT | REM |
|
| |
TR | IGGER | OTE | 1 | ||
|
|
|
|
REMOTE2
IN
OUT
AC IN
Removing the PC Card
Press the eject button slowly. The eject button card pops out a little. Press the eject button slowly again. Grasp the edges of the PC card and pull it out. Push and insert the eject button fully until it stops.
MOUSE/HUB) |
|
| Eject button |
USB( |
|
|
|
| USB(PC) |
| 2 |
|
| PC | CARD |
|
|
| |
PC |
| 1 | |
| C |
| |
| ONTROL |
|
|
| IN |
| LAN |
|
|
| |
| OUT |
|
|
SC | TR | RE |
| MOTE | |
| IGGER | 1 |
REMOTE2
IN
OUT
ACIN
NOTE: Do not eject the PC card while its data is being accessed.
CAUTION: Make sure that the PC card or LAN card is removed during Standby mode (NOT Idle mode)or with the main power off.Failure to do so may cause damage to the data on your PC card or LAN card,or may cause the projector to malfunction.Should a malfunction occur, turn off the main power and turn it back on.
Direction for Inserting the PC Card
The PC card has a top and bottom and must be inserted into the PC card slot in a specific direction. It cannot be inserted back- wards or
PC Card Type
The PC Card slot accepts PCMCIA Type II only.