Dukane 9060 user manual Adjust Source

8. Using On-Screen Menu

Edit	.............. Enables you to change source names or assign
	the direct key.
	Source Name
	Enter a signal name. Up to 18 alphanumeric char-
	acters can be used.
	Input Terminal
	Change the input terminal. RGB1 and RGB2 are
	available for RGB signal; Video and S-Video are
	available for composite signal.
	Direct key
	You can assign specific remote keys for direct
	signal input selection.
	Lock
	Set so that the selected signal cannot be deleted
	when "All Delete" is executed. The changes can-
	not be saved.
	Skip
	Set so that the selected signal will be skipped
	during auto search.
	When complete, select OK and press ENTER.
	To exit without storing setting, select Cancel.
	Select "Source Name" and press ENTER to dis-
	play the Source Name Edit window. You can
	change source name on this window. Press [￿]
	to display the software keyboard, which you can
	enter alphanumeric characters. See page 10-10
	for the key function of the software keyboard.

All Delete ..... This feature enables you to delete all the regis-

tered signals in the Entry List.

The following buttons are not available for the currently project- ing signals:

1)The Cut and Paste buttons on the Entry Edit Command screen

2)The Input Terminal button on the Entry Edit screen

Adjust (Source)

Picture

Brightness

Adjusts the brightness level or the back raster intensity.

Contrast

Adjusts the intensity of the image according to the incoming signal.

Saturation

Adjust saturation at the white peak.

Color

Increases or decreases the color saturation level (not avail- able for RGB).

Hue

Varies the color level from +/- green to +/-blue. The red level is used as reference. This adjustment is only valid for Video and Component inputs (not available for RGB).

Sharpness

Controls the detail of the image for Video (not available for RGB).

Video Adjust (not available for RGB)

Noise Reduction

Select one of the three levels for reducing video noise: Low, Me- dium or High.

NOTE: The lower the Noise Reduction level, the better the image quality by way of higher video bandwidth.

Color Matrix

Select an appropriate color matrix for your input signal, either HDTV or SDTV.

Y/C Delay

Adjusts Y/C delay level.

YTR Adjustment

Adjusts luminance transient time.

CTR Adjustment

Adjusts chroma transient time.

8-8