Dukane 9060 user manual Dhcp

8. Using On-Screen Menu

WEP (for Wireless only)

Select this option whether using the WEP (Wired Equivalent Pri- vacy) key for encryption or not. To use encryption, specify WEP key.

Disable	Will not turn on the encryption feature.Your com-
	munications may be monitored by someone.
64bit	Uses 64-bit datalength for secure transmission.
128bit	Uses 128-bit datalength for secure transmission.
	This option will increase privacy and security
	when compared to use of 64bit datalength en-
	cryption.

NOTE: The WEP settings must be the same as communication devices such as PC or access point in your wireless network. When you use WEP, your image trans- mission speed will slow down.

Key Select:

Selects one key from the four keys below when selecting [64bit] or [128bit] in [WEP].

Key1-4:

Enter encryption key when selecting [64bit] or [128bit] in [WEP]. Up to 5 characters can be set in 64 bit and up to 13 characters in 128 bit. Press the “HEX” button to change to “ASCII” to set the key in ASCII digit.You can toggle this button between “ASCII” and “HEX”.

The key can also be set in hexadecimal digit.

*Hexadecimal uses 0 to 9 and A to F.

*Up to 10 characters can be set in 64 bit and up to 26 characters in 128 bit.

NOTE: Only numbers can be entered when you use the remote control Source/ Input buttons.

DHCP

Depending on your network environment, acquiring an IP ad- dress from a DHCP server may not be possible.

Should this happen, consult your network administrator to make changes to the following settings.

Host Name option

Select whether or not to add option hostname for DHCP.

None	Not add
Request	Add at the time of DHCP_REQUEST.
Discover/Request ....	Add at the time of DHCP_DISCOVER
	and DHCP_REQUEST.

Host Name

Type in a hostname. This field is available only when “Request” or “Discover/Request.”

Client-identifier option

Select whether or not to add option client identifier for DHCP.

None	Not add
Request	Add at the time of DHCP_REQUEST.
Discover/Request ....	Add at the time of DHCP_DISCOVER
	and DHCP_REQUEST.

Use MAC address

Turn on to use MAC address for Client-identifier.

Client-identifier

Type in a client identifier.

8-21