8. Using On-Screen Menu
Sync Protection | Lens Memory |
When a VCR, DVD, or some other equipment that supports Copyguard (a copy prevention system) is played back, the screen may be displayed in a curved manner. Adjustments are made in such circumstances. Use the SELECT or button to adjust the VD level.
VD Delay
This function serves to store or apply the adjusted value when using the Shift, Focus and Zoom buttons on the projector or the remote control.
Set Custom Point | Store the current adjusted values in |
| memory. |
Use Custom Point | Apply the adjusted values to the cur- |
| rent signal. |
NOTE:
•To enable the Lens Memory feature, select [Ref. Adjust] → [Ref. Lens Memory] and place a check mark next to “Yes” for [Use Point on Signal Change?].
•The Lens Memory feature is not available in the Link Mode.
•To store adjusted values common to all the input sources, use the Ref. Lens Memory. See page
Adjustment:
This feature is used to correct vertical jitter of a signal.
NOTE: When connecting with a scan converter:
If an image from the scan converter is not correctly displayed, adjust to select the best level point so that the image is displayed correctly.
Field Invert:
This feature is used to correct diagonal lines of a
Invert the odd or even field of a video signal.
Signal Level
R/G/B, Y/Cb/Cr or Y/Pb/Pr Gain:
Adjust RGB, Component or HDTV Gain to match multiple pro- jector color uniformity.
Signal Type
RGB/Component
Select either the RGB signal type or the Component signal type.
RGB | RGB signal |
Component .. | Component signals such as Y/Cb/Cr, Y/Pb/Pr |
NOTE: This feature is available on RGB 1 and 2 only. If you do not get a better picture even when you set "Signal Select" to "Component" in Setup, set this to "Com- ponent".
Sound
Volume/Bass/Treble
Controlling Volume, Bass and Treble.
Adjusts the sound, bass and treble level of the projector speaker and AUDIO OUT (RCA).