Dukane 9060 user manual Lamp Settings, Link Mode

Page 86

8. Using On-Screen Menu

Disabling the Cabinet Buttons [Control Panel Key Lock]

This option turns on or off the Control Panel Key Lock function.

NOTE:

*This Control Panel Key Lock does not affect the remote control functions.

*When the cabinet buttons are disabled, pressing and holding the CANCEL button for about 10 seconds will change the setting to enable.

Lamp Settings

The projector is designed to accept two lamps (dual lamp sys- tem). This dual lamp system provides prolong lamp life or high brightness or extra lamp (Extended life lamp).

NOTE: Be sure to use the same lamp type for both lamp 1 and 2.

Lamp Mode

This feature enables you to select two modes of the lamp: Normal and Eco. The lamp life can be extended by using the Eco mode.

Normal Mode . This is the default setting (100% Brightness).

Eco Mode .... Select this mode to increase the lamp life (80%

Brightness).

NOTE: When the optional Extended life lamp is used, the Lamp Mode is fixed to Eco mode.

Lamp Select

This feature allows you to select which lamp to be used.

NOTE: This option is not displayed in the Basic menu.

*Changes to these options will not take effect for 90 seconds imme- diately after the lamp is turned off (120 seconds for the extended life lamp).

*The lamp cannot be turned off for 60 seconds immediately after the lamp is turned on. Changes to these options cannot take effect until then.

Dual

Select to use the two lamps at the same time to

 

increase brightness.

Lamp1/2

Select to use one lamp of the two lamps. (Lamp

 

1 on the right side and Lamp 2 on the left side

 

when viewed from the front)

Interval

This allows you to specify the time for switching between the two lamps alternately. This option is available only when “Lamp1” or “Lamp2” is selected. When Auto is selected and one lamp has reached the end of its usable life, the other lamp is turned on. The lamp cannot be turned off for 60 seconds immediately after the lamp is turned on.

NOTE: This option is not displayed in the Basic menu.

Lamp Type:

The lamp type you use and its information are displayed here. The information displayed here are:

Light on or off, standard lamp or extended life lamp and re- maining hours.

Link Mode

Settings

Selecting Standalone/Master/Slave

This feature is used for multiple projector connection. The master projector is set to Master. The other slave projectors are set to Slave. When not using Link mode, set to Standalone. See page 7-5 for setting up for double stacking in link mode.

Selecting Communication Speed [Communication Speed] This feature sets the baud rate of the PC CONTROL port (D- Sub 9 Pin).This is the same procedure as in “Page 6” of “Setup”.

Enabling and Disabling Projector ID:

Each projector needs its own unique addresses when used in serial communication mode. This is the same procedure as in “Page 6” of “Setup”.

Copying Signals in the Entry List

Press the Entry List Copy button to copy all of the signals re- corded in the Entry List from one projector to another.

8-18

Page 85 Page 87
Image 86
Page 85 Page 87
Contents Model Important Safeguards RF InterferenceLamp Replacement Power SupplyCleaning Fire and Shock PrecautionsTable of Contents Remote Control Features IntroductionIntroduction Whats in the Box? ProjectorWill let you immerse yourself in large screen viewing Introduction Introduction to the ProjectorCongratulations on Your Purchase of the projector Introduction Getting to Know Your Projector Attaching and Removing the Terminal CoversIntroduction Depression for foot 4 locationsCarrying the Projector Adjust the lens focus Top FeaturesLights while accessing a PC card Displays the menuTerminal Panel Features Terminal Panel Features Introduction Remote Control Features Position CancelPixel Entry List BOperating Range for Wireless Remote Control Remote Control PrecautionsRemote Control Battery Installation Using the Remote Control in Wired Operation Page Installation Screen Size and Projection Distance InstallationSetting Up Your Projector Applicable lens and throw distance/ List of screen sizesThrow distance Down Right 32 H Installation Lens Shift Adjustable RangeMaximum Possible Range for GT20ZL Left 32 HDown 39V Right 24H 0.19H Maximum Possible Range for GT13ZLB/GT19ZL/GT24ZLB/GT34ZLBValues in parentheses for GT13ZLB 39V Left 24H 0.19HBefore installation Installation Optional Lens InstallationThis section describes how to install the lens Preparation Tools needed for installationReinstall the lens hood Installation Making Connections Connecting an External Monitor To connect Scart output RGBConnecting Your DVD Player DVD playerConnecting Your VCR or Laser Disc Player Connecting to a Network Example of LAN connectionConnecting the Supplied Power Cable Page Projecting an Image Basic OperationProjecting an Image Turning on the ProjectorUsing the menu Selecting the computer or video sourceTips on Adjusting Focus + +When using the remote control or cabinet buttons Turning Up or Down Volume Optimizing RGB Picture AutomaticallyProjecting an Image Turning off the Projector To turn off the projectorPage Convenient Features Help Getting the On-line Help and InformationPicture Sound OSD Operate the PC mouse using the USB mouse Convenient Features Using the USB MouseUsing the USB HUB Function Operate the Projector Menus using the USB mouseConvenient Features Changing Background Logo Making Freehand Drawings on a Projected Image ChalkBoardCustom memory Convenient Features Lens MemoryReference memory Page Using the Viewer Using the Viewer Making the Most out of the Viewer FunctionWhen the tool bar is not displayed Projecting slides ViewerTon on the remote control or projector cabinet Auto Play ModeSwitching to Slides Directly from Other Input Modes Viewing Digital ImagesTo delete captured images Using the PC Card Files Fucntion PC Card FilesDeleting Captured Images ReturnPage Using the Projector in a Network Using the Projector in a Network END User License AgreementWhat Can Be Accomplished with the Supplied Software Using the Projector in a Network IntroductionContents of the Supplied CD-ROM Using the Projector in a Network Supported Projectors Equipment to Be Prepared Settings at the Projector SideSettings at the Personal Computer Side Connection at the Projector SideUsing the Projector in a Network Software Installation UninstallingExit the Software Dynamic Image Utility Start the SoftwareDisplay Help Viewer PPT Converter Start the SoftwareUsing the Projector in a Network Troubleshooting Check Points CountermeasuresComputer and the projector? Projector Projector. IEU Setting Up for Double Stacking Link Mode Assigning Projector IDs Slave projectorRecommended Throw Distances for Double Stack Setting Up for Double Stacking in Link ModeThrow Distances for Optional Lenses GT19ZL GT20ZLPC Control OUT HookupVideo PC ControlLink Mode Setting Display a desired input signal on the master projectorLens Shift MENU/SELECT ENTER/CANCELPower FocusUsing On-Screen Menu Menu Descriptions & FunctionsStores the setting or adjustments Using On-Screen Menu Basic Menu OperationUsing the Menus Tings or adjustmentsUsing On-Screen Menu List of Direct Button CombinationsVideo Viewer LAN Slot Using On-Screen Menu Menu treeDvidigital HDTV/SDTVBackground Black/Logo Blue Rgbout Terminal RGB 1/RGB Remote Sensor Front/Back/Left/Right Video Mode SelectDisable Default Source Select Closed Caption Caption 1-4/TextSsid Menu Descriptions & Functions Using the Entry ListEntry Edit Command For example a → B → C → 1 → a →Adjust Source SweetVision Split ModeUser Adjust DeinterlaceAdjusting White Balance Selecting Gamma Correction ModeAdjusting Color Temperature Selecting Base SettingSound VD DelaySignal Level Sync ProtectionKeystone Position Using On-Screen Menu Ref. AdjustCornerstone Brightness R/G/B, Contrast R/G/BProjector Options Factory DefaultAll Data /Current Signal MenuManual Setting Mouse Button and Sensitivity Mouse SetupSetting Viewer Options Viewer Options OFFSelecting Operation Mode Operation Mode Select Selecting Signal Format Signal SelectFound source Identifies the 169 or 43 signalEnabling and Disabling Projector ID Pull-down menuLamp Settings Link ModeLAN Mode Advanced Checking this box will make the set default route validIEEE802.11 wireless standard CorrespondenceDhcp Mail Alert Mail Checking this box enables Alert Mail feature Entry Setting a PasswordDelete Security To register a PC card as a protect keyTools TimerOn/Off Timer To delete PC card data you registeredEnabling the On or Off Timer Using ChalkBoard Using CaptureUsing PC Card Files HelpProjector Information Test PatternMaintenance To replace the lamp MaintenanceReplacing the Lamp To replace the filter Maintenance Replacing or Cleaning the FilterTo clean the filter Maintenance Cleaning the Cabinet and the Lens Appendix 10-10Appendix USB Memory Device or USB Memory Card Reader Support Status Indicator Appendix TroubleshootingPower Indicator Lamp 1/2 IndicatorAppendix Common Problems & SolutionsProblem Check These Items Electrical Appendix SpecificationsOptical Mechanical Mini D-Sub 15 Pin Connector Appendix Cabinet DimensionsPin Assignments of D-Sub RGB Input Connector Unit = mm inchAppendix Compatible Input Signal List SXGA+Appendix Remote 1 Connector Pin NoAppendix PC Control Codes and Cable Connection Using Software KeyboardPC Control Connector D-SUB 9P PC Control CodesPreparation Before Use Appendix ⁄0Operation Using an Http BrowserOverview Handling of the Address for Operation via a BrowserRGB1 RGB2Page Audio Visual Products
Top Page Image Contents