Canon LV-5200 owner manual Connecting the Projector, Terminals of the Projector, Audio Input Jacks

CONNECTING THE PROJECTOR

TERMINALS OF THE PROJECTOR

This projector has input and output terminals on its back for connecting computer and video equipment. Refer to figures on pages 11 to 13 for these connections.

S-VIDEO INPUT JACK	AUDIO INPUT JACKS
Connect the S-VIDEO
	Connect the audio
output from your	output from your video
video equipment to	equipment to these jacks.
this jack.	(Refer to P13.)
(Refer to P13.)	● When the audio output
	is monaural, connect it
	to L (mono) jack.

VIDEO INPUT JACKS	AUDIO OUTPUT JACKS
	Connect an external
Connect the composite video
output from your video	audio amplifier to these
equipment to VIDEO/Y jack	jacks.
or connect the component	(Refer to P12, 13.)
video outputs to VIDEO/Y,
Pb/Cb and Pr/Cr jacks.
(Refer to P13.)

DVI - I	AUDIO	VIDEO IN	Pb/Cb	Pr/Cr
RGB IN-2	R IN L	Y
	S – VIDEO IN	COMPUTER	AUDIO
			R	OUT L
		AUDIO IN
				RESET

RGB IN-1 / OUT CONTROL PORT

RESET BUTTON

The projector uses a micro processor for control, and occasionally, need to be reset. This can be done by pressing the RESET button with a pen, which will shut down and restart the unit. Do not use the RESET function excessively.

CONTROL PORT CONNECTOR

When controlling your computer with the Remote Control Unit of this projector, connect the mouse port of your computer to this connector. (Refer to P12.)

RGB INPUT 2 TERMINAL (DIGITAL/ANALOG)

Connect computer output (Digital / Analog DVI-I type) to this terminal. (Refer to P12.)

RGB INPUT 1 / OUT TERMINAL

(ANALOG)

This terminal is switchable and can be used as computer input or monitor output. Set the terminal up as either Computer input or Monitor output properly before using this terminal.

(Refer to P12, 36.)

Note:This terminal outputs analog signal from DVI-I RGB IN 2 terminal only.

COMPUTER AUDIO

INPUT JACK

Connect the audio output (stereo) from your computer to this jack. (Refer to P12.)

USB CONNECTOR (Series B)

When controlling your computer with the Remote Control Unit of this projector, connect the USB port of your computer to this connector. (Refer to P12.)

11