Canon LV-5200 Selecting the Input Source, Rgb, RGB Scart RGB Digital RGB Analog, Input Menu

COMPUTER INPUT (RGB Scart 21-Pin Video Input)

SELECTING THE INPUT SOURCE

DIRECT OPERATION

Choose either Computer 1 or Computer 2 by pressing the INPUT button on the Top Control or on the Remote Control Unit.

If the projector cannot reproduce a proper image, select the correct input source through the “MENU OPERATION” (see below).

INPUT button

Computer 1 ✽

Computer 2

Video

✽Computer 1 is not displayed when RGB IN 1/ OUT terminal is used as MONITOR OUT.

MENU OPERATION

1	Press the MENU button and the ON-SCREEN MENU will
	appear. Press the POINT LEFT/RIGHT button to move the red
	frame pointer to the INPUT Menu icon.
2	Press the POINT DOWN button to move the red arrow pointer to
	either Computer 1 or Computer 2 (Computer 1 is not displayed
	when MONITOR OUT is selected in the SETTING Menu.), and
	then press the SET button. The Source Select Menu will
	appear.
3	Move the pointer to the correct input source and then press the
	SET button.

INPUT MENU

	INPUT Menu icon
	Move the pointer either
	Computer 1 or Computer
	2 and press the SET
Computer 1	button.
	Source Select Menu

RGB

RGB (Scart)

RGB (Digital)

RGB (Analog)

When the input source is coming from a computer through RGB IN 1 / OUT terminal, select RGB.

When the input source is coming from a DVD player through RGB IN 1 / OUT terminal, select RGB (Scart).

When the digital signal is connected to DVI terminal, select RGB (Digital).

When the analog signal is connected to DVI terminal, select RGB (Analog).

Move the pointer to RGB

or RGB (Scart) and

press the SET button.

Computer 2

Source Select Menu

Move the pointer to RGB (Digital) or RGB (Analog) and press the SET button.

✽Computer 1 is not displayed when RGB IN 1/ OUT terminal is used as MONITOR OUT.

NOTE

●Computer 1 can be selected when RGB IN 1 / OUT terminal is set as COMPUTER 1 at the menu item “Terminal” in the SETTING Menu. (Refer to page 36.)

22