Canon LV-5200 owner manual Computer Input Image Level Adjustment, Image Adjust Menu

Page 29

COMPUTER INPUT

IMAGE LEVEL ADJUSTMENT

1

Press the MENU button and the ON-SCREEN MENU will

appear. Press the POINT LEFT/RIGHT buttons to move the red

 

frame pointer to the IMAGE ADJUST Menu icon.

2

Press the POINT DOWN button to move the red frame pointer to

the item that you want to adjust, and then press the SET button.

The level of each item is displayed. Adjust each level by pressing the POINT LEFT/RIGHT button(s).

Contrast

Press the POINT LEFT button to decrease the contrast, and the POINT RIGHT button to increase the contrast. (From 0 to 63.)

Brightness

Press the POINT LEFT button to adjust the image darker, and the POINT RIGHT button to adjust the image brighter. (From 0 to 63.)

Color

Press the POINT LEFT button to lighten the color, and the POINT RIGHT button to darken the color. (From 0 to 63.)

Tint

Press the POINT LEFT button or the POINT RIGHT button to obtain a proper color. (From 0 to 63.)

White balance (Red)

Press the POINT LEFT button to lighten the red tone and the POINT RIGHT button to darken the tone. (From 0 to 63.)

White balance (Green)

Press the POINT LEFT button to lighten the green tone and the POINT RIGHT button to darken the tone. (From 0 to 63.)

White balance (Blue)

Press the POINT LEFT button to lighten the blue tone and the POINT RIGHT button to darken the tone. (From 0 to 63.)

Sharpness

Press the POINT LEFT button to soften the image, and the POINT RIGHT button to sharpen the image. (From 0 to 15.)

Gamma

Press the POINT LEFT button or the POINT RIGHT button to obtain a better balance of the contrast. (From 0 to 15.)

Auto grayscale

When this function is “ON,” it automatically enhances the contrast of the bright and dark part of image.

Auto fleshtone

When this function is “ON,” it produces a more vivid image according to the image condition.

IMAGE ADJUST MENU

IMAGE ADJUST

Menu icon

Move the pointer to the item to be selected and then press the SET button.

Selected Image level

Press the POINT LEFT/RIGHT but- tons to adjust the value.

Store icon

Press the SET button at this icon to store the adjustment.

NOTE

Auto grayscale cannot be operated when the input signal is digital.

29

Image 29
Contents LV-5200 To the Owner Voor de klanten in Nederland Safety InstructionsFederal Communication Commission Notice CompliancesTable of Contents Computers Features and DesignColor TV Systems Component VideoHOT AIR Exhausted PreparationNomenchtor Connecting AC Power Cord SETTING-UP the ProjectorInstalling the Projector in Proper Position For Continental EuropeRoom Light Adjustable FeetPreparation Positioning the Projector Moving the Projector Preparation Mounting the Lens CoverTerminals of the Projector Connecting the ProjectorAudio Input Jacks RGB Input 1 / OUT TerminalTerminals Projector Connecting to ComputerTerminals Connecting to Video EquipmentVideo VIDEO/Y AudioLaser Pointer Function Operation of the Remote Control UnitBefore Operation Remote Control Unit Batteries Installation Point Volume + / Buttons TOP Controls and IndicatorsTurns yellow when the life Flow of ON-SCREEN Menu Operation HOW to Operate the ON-SCREEN MenuOperating the ON-SCREEN Menu Before Operation Menu BAR Image Adjust Menu Sound MenuGuide Window Image Select MenuBasic Operation Lamp modeTurning on / OFF the Projector Turning on the ProjectorZoom Adjustment Adjusting the ScreenFocus Adjustment Keystone AdjustmentTimer Function Sound AdjustmentBasic Operation No Show Function Direct OperationRGB Selecting the Input SourceRGB Scart RGB Digital RGB Analog Input MenuComputer Input Selecting the Computer SystemSelect Computer System Manually SvgaResolution Computer Input Compatible Computer SpecificationsFreq KHzAuto PC Adjustment PC AdjustmentPC Adjust Menu Auto PC AdjComputer Input Manual PC Adjustment Full screen Display areaDisplay area H Image Level Select Direct Picture Image AdjustmentImage Level Select Menu Image Select MenuImage Adjust Menu Computer Input Image Level AdjustmentScreen Menu Picture Screen AdjustmentRGB Scart Input Video InputAuto VideoSelecting the Video System Component Video Signal FormatPAL / Secam / Ntsc / NTSC4.43 / PAL-M / PAL-N AV System Menu Video or S-VIDEOImage button Standard Cinema Custom CinemaVideo Input Image Level Adjustment Provides the image at a normal video aspect ratio of 4 Setting Menu SettingSetting Menu To change the code of the Projector To change the code of the Remote Control UnitReset the Lamp Replace Counter Lamp ReplacementAppendix Lamp ReplaceAppendix Lamp Replace Counter Lamp Handling PrecautionsOperating Wireless Mouse Operating Wireless MouseInstallation AIR Filter Care and Cleaning MaintenanceCleaning Projection Lens RecommendationTroubleshooting Wireless Mouse Remote Control UnitDoes not work Function does notAppendix Indicators and Projector Condition Indicators Projector ConditionTechnical Specifications Terminal HDB15-PIN Pin Configuration Appendix Configurations of TerminalsTerminal DVI-I Terminal Pin Configuration RGB Input 1 / OUT Terminal AnalogOptional Parts Canon U.S.A., INC
Related manuals
Manual 2 pages 2.56 Kb