Canon LV-5200 Selecting the Video System, PAL / Secam / Ntsc / NTSC4.43 / PAL-M / PAL-N

Page 32

VIDEO INPUT

SELECTING THE VIDEO SYSTEM

1	Press the MENU button and the ON-SCREEN MENU will
1	appear. Press the POINT LEFT/RIGHT buttons to move the red
	frame pointer to the AV SYSTEM Menu icon.
2	Press the POINT DOWN button to move the red arrow pointer to
2	the system that you want to select and then press the SET

button.

VIDEO/Y JACK OR S-VIDEO JACK

Auto

The projector automatically detects the incoming video system, and adjusts itself to optimize its performance.

When the video system is PAL-M or PAL-N, select system manually.

PAL / SECAM / NTSC / NTSC4.43 / PAL-M / PAL-N

If the projector cannot reproduce a proper video image, it is necessary to select a specific broadcast signal format among PAL, SECAM, NTSC, NTSC 4.43, PAL-M, and PAL-N.

AV SYSTEM MENU (VIDEO OR S-VIDEO)

AV SYSTEM Menu icon

This box indicates the system being selected.

Move the pointer to the system and press the SET button.

VIDEO/Y, Pb/Cb, Pr/Cr JACKS

Auto

The projector automatically detects the incoming video signal, and adjusts itself to optimize its performance.

COMPONENT VIDEO SIGNAL FORMAT

If the projector cannot reproduce a proper video image, it is necessary to select a specific component video signal format among 480i, 575i, 480p, 575p, 720p, 1035i and 1080i.

AV SYSTEM MENU (COMPONENT VIDEO)

AV SYSTEM Menu icon

This box indicates the system being selected.

Move the pointer to the system and press the SET button.

32

Image 32

Contents LV-5200 To the Owner Safety Instructions Voor de klanten in NederlandCompliances Federal Communication Commission NoticeTable of Contents Features and Design ComputersColor TV Systems Component VideoHOT AIR Exhausted PreparationNomenchtor SETTING-UP the Projector Connecting AC Power CordInstalling the Projector in Proper Position For Continental EuropeRoom Light Adjustable FeetPreparation Positioning the Projector Preparation Mounting the Lens Cover Moving the ProjectorConnecting the Projector Terminals of the ProjectorAudio Input Jacks RGB Input 1 / OUT TerminalConnecting to Computer Terminals ProjectorConnecting to Video Equipment TerminalsVideo VIDEO/Y AudioLaser Pointer Function Operation of the Remote Control UnitBefore Operation Remote Control Unit Batteries Installation Point Volume + / Buttons TOP Controls and IndicatorsTurns yellow when the life Flow of ON-SCREEN Menu Operation HOW to Operate the ON-SCREEN MenuOperating the ON-SCREEN Menu Image Adjust Menu Sound Menu Before Operation Menu BARGuide Window Image Select MenuLamp mode Basic OperationTurning on / OFF the Projector Turning on the ProjectorAdjusting the Screen Zoom AdjustmentFocus Adjustment Keystone AdjustmentSound Adjustment Timer FunctionBasic Operation No Show Function Direct OperationSelecting the Input Source RGBRGB Scart RGB Digital RGB Analog Input MenuSelecting the Computer System Computer InputSelect Computer System Manually SvgaComputer Input Compatible Computer Specifications ResolutionFreq KHzPC Adjustment Auto PC AdjustmentPC Adjust Menu Auto PC AdjComputer Input Manual PC Adjustment Full screen Display areaDisplay area H Picture Image Adjustment Image Level Select DirectImage Level Select Menu Image Select MenuComputer Input Image Level Adjustment Image Adjust MenuPicture Screen Adjustment Screen MenuVideo Input RGB Scart InputAuto VideoComponent Video Signal Format Selecting the Video SystemPAL / Secam / Ntsc / NTSC4.43 / PAL-M / PAL-N AV System Menu Video or S-VIDEOCinema Image button Standard Cinema CustomVideo Input Image Level Adjustment Provides the image at a normal video aspect ratio of 4 Setting Menu SettingSetting Menu To change the code of the Remote Control Unit To change the code of the ProjectorLamp Replacement Reset the Lamp Replace CounterAppendix Lamp ReplaceLamp Handling Precautions Appendix Lamp Replace CounterOperating Wireless Mouse Operating Wireless MouseInstallation Maintenance AIR Filter Care and CleaningCleaning Projection Lens RecommendationTroubleshooting Remote Control Unit Wireless MouseDoes not work Function does notIndicators Projector Condition Appendix Indicators and Projector ConditionTechnical Specifications Appendix Configurations of Terminals Terminal HDB15-PIN Pin ConfigurationTerminal DVI-I Terminal Pin Configuration RGB Input 1 / OUT Terminal AnalogOptional Parts Canon U.S.A., INC

Related manuals

Manual 2 pages 2.56 Kb