Canon LV-5200 owner manual To the Owner

Page 2

TO THE OWNER

Before operating this projector, read this manual thoroughly to operate the projector properly.

This projector provides many convenient features and functions. Operating the projector properly enables you to manage those features and maintain it in better condition for a considerable time.

Improper operation may result in not only shortening the product-life, but also malfunctions, fire hazard, or other accidents.

If your projector seems to operate improperly, read this manual again, check operations and cable connections and try the solutions in the “TROUBLESHOOTING” section in the end at this manual. If the problem still persists, contact the sales dealer where you purchased the projector or the service center.

SAFETY PRECAUTIONS

WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

This projector produces an intensive light from the projection lens. Do not look directly into the lens; it may damage your eyes. Be especially careful that children do not look directly into the beam.

This projector should be set in the way indicated. If not, it may result in fire hazard.

● Provide appropriate space on the top, sides and rear of the

 

 

 

SIDE and TOP

 

REAR

 

projector cabinet for allowing air circulation and cooling the

 

 

 

 

 

 

 

 

 

 

20cm

 

 

 

 

 

 

 

 

projector. Minimum clearance must be maintained. If the

 

 

 

 

 

 

 

 

 

 

projector is to be built into a compartment or similarly enclosed,

 

 

 

 

 

 

 

 

 

 

the minimum distances must be maintained. Do not cover the

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ventilation slot on the projector. Heat build-up can reduce the

 

 

 

50cm

 

50cm

 

 

50cm

 

 

 

 

 

 

 

 

service life of your projector, and can also be dangerous.

 

 

 

 

 

 

 

 

 

 

Do not put any flammable objects or spray cans near the projector, hot air is exhausted from the ventilation holes.

The Remote Control Unit, supplied with this projector, emits a laser beam as the laser pointer function from the Laser Light Window while pressing the LASER button (for 1 minute / LASER POINTER INDICATOR lights red to indicate laser emission). To reduce the risk of injury, do not look into the Laser Light Window nor shine the laser beam on yourself or other people.

If the projector is not to be used for an extended period of time, unplug the projector from the AC outlet.

READ AND KEEP THIS OWNER'S MANUAL FOR LATER USE.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER- SERVICEABLE PARTS INSIDE EXCEPT LAMP REPLACEMENT. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT.

THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS IN THE OWNER'S MANUAL WITH THIS UNIT.

2

Image 2
Contents LV-5200 To the Owner Safety Instructions Voor de klanten in NederlandCompliances Federal Communication Commission NoticeTable of Contents Color TV Systems Features and DesignComputers Component VideoHOT AIR Exhausted PreparationNomenchtor Installing the Projector in Proper Position SETTING-UP the ProjectorConnecting AC Power Cord For Continental EuropeRoom Light Adjustable FeetPreparation Positioning the Projector Preparation Mounting the Lens Cover Moving the ProjectorAudio Input Jacks Connecting the ProjectorTerminals of the Projector RGB Input 1 / OUT TerminalConnecting to Computer Terminals ProjectorVideo VIDEO/Y Connecting to Video EquipmentTerminals AudioLaser Pointer Function Operation of the Remote Control UnitBefore Operation Remote Control Unit Batteries Installation Point Volume + / Buttons TOP Controls and IndicatorsTurns yellow when the life Flow of ON-SCREEN Menu Operation HOW to Operate the ON-SCREEN MenuOperating the ON-SCREEN Menu Guide Window Image Adjust Menu Sound MenuBefore Operation Menu BAR Image Select MenuTurning on / OFF the Projector Lamp modeBasic Operation Turning on the ProjectorFocus Adjustment Adjusting the ScreenZoom Adjustment Keystone AdjustmentBasic Operation No Show Function Sound AdjustmentTimer Function Direct OperationRGB Scart RGB Digital RGB Analog Selecting the Input SourceRGB Input MenuSelect Computer System Manually Selecting the Computer SystemComputer Input SvgaFreq Computer Input Compatible Computer SpecificationsResolution KHzPC Adjust Menu PC AdjustmentAuto PC Adjustment Auto PC AdjComputer Input Manual PC Adjustment Full screen Display areaDisplay area H Image Level Select Menu Picture Image AdjustmentImage Level Select Direct Image Select MenuComputer Input Image Level Adjustment Image Adjust MenuPicture Screen Adjustment Screen MenuAuto Video InputRGB Scart Input VideoPAL / Secam / Ntsc / NTSC4.43 / PAL-M / PAL-N Component Video Signal FormatSelecting the Video System AV System Menu Video or S-VIDEOCinema Image button Standard Cinema CustomVideo Input Image Level Adjustment Provides the image at a normal video aspect ratio of 4 Setting Menu SettingSetting Menu To change the code of the Remote Control Unit To change the code of the ProjectorAppendix Lamp ReplacementReset the Lamp Replace Counter Lamp ReplaceLamp Handling Precautions Appendix Lamp Replace CounterOperating Wireless Mouse Operating Wireless MouseInstallation Cleaning Projection Lens MaintenanceAIR Filter Care and Cleaning RecommendationTroubleshooting Does not work Remote Control UnitWireless Mouse Function does notIndicators Projector Condition Appendix Indicators and Projector ConditionTechnical Specifications Terminal DVI-I Terminal Pin Configuration Appendix Configurations of TerminalsTerminal HDB15-PIN Pin Configuration RGB Input 1 / OUT Terminal AnalogOptional Parts Canon U.S.A., INC
Related manuals
Manual 2 pages 2.56 Kb