Dukane user manual Specifications, Model Number 8946 Optical

Page 60

SPECIFICATIONS

This section provides technical information about the 8946 Projector's performance

Model Number

8946

Optical

 

LCD Panel

1.0" p-Si TFT active-matrix with Micro Lens Array

Resolution

1024×768 pixels up to UXGA with Advanced AccuBlend

Lens

Motorized zoom and focus:

 

F1.74 – 2.18 f=30.8mm – 41.6mm

Lamp

300 W DC standard / 160 W DC (Optional Extended life lamp)

Color Image Sensor

23,040 pixels (160 dots×144 lines)

Image Size

25 inches – 500 inches (0.6 m – 12.7 m) diagonal

Projection Distance

2.96 ft – 51.23 ft / 1.0 m (Tele) – 15.6 m (Wide)

Projection Angle

Tele : 10.3° – 10.7° Wide : 13.7° – 14.4°

Electrical

 

Inputs

2 RGB (D-Sub 15 Pin/BNC×5), 1 DVI, 1 S-Video, 1 Video, 2 PC Card,

 

3 Stereo Mini Audio, 2 (L/R) RCA Audio, 1 PC Control, 1 (L/R) RCA Audio

Outputs

1 RGB, 1 Stereo Mini Audio

USB Port

1 A Type, 1 B Type

Video Compatibility

NTSC, NTSC4.43, PAL, PAL-60, PAL-N, PAL-M, SECAM, HDTV:1080p, 1080i, 720p, 576p, 576i, 480p, 480i

 

(w/optional cable)

Scan Rate

Horizontal: 15 kHz to 100 kHz (RGB: 24 kHz or over) / Vertical: 48 Hz to 120 Hz

Video Bandwidth

RGB: 80 MHz (-3dB)

Color Reproduction

16.7 million colors simultaneously, Full color

Horizontal Resolution

NTSC / NTSC4.43/PAL/PAL-M/PAL-N/PAL60: 600 TV lines

 

SECAM: 350 TV lines

 

RGB: 1024 dots (H)×768 dots (V),

External Control

RS232, IR, USB, LAN (optional)

Sync Compatibility

Separate Sync / Composite Sync / Sync on G

Built-in Speakers

5W×2 (stereo)

Power Requirement

100 - 240V AC, 50 / 60 Hz

Input Current

4.3A

Power Consumption

1.0W in Standby mode/14W in Idle mode/415W in Lamp Normal mode/345W in Lamp Eco mode

 

(250W in use of the optional Extended Life lamp)

Mechanical

 

Installation

Orientation: Desktop/Front, Desktop/Rear, Ceiling/Front, Ceiling/Rear

Dimensions

13.2" (W)×4.5" (H)×12.7" (D)

 

334mm (W)×115mm (H)×323mm (D)

 

(not including protrusions)

Net Weight

13.0 lbs / 5.9 kg

Environmental Considerations

Operational Temperatures : 32° to 95°F (0° to 35°C), 20% to 80% humidity (non-condensing)

Storage Temperatures : 14° to 122°F (-10° to 50°C), 20% to 80% humidity (non-condensing)

Regulations

UL/C-UL Approved (UL 60950, CSA 60950)

 

Meets DOC Canada Class B requirements

 

Meets FCC Class B requirements

 

Meets AS/NZS CISPR22 Class B

 

Meets EMC Directive (EN55022, EN55024, EN61000-3-2, EN61000-3-3)

 

Meets Low Voltage Directive (EN60950, TUV GS Approved)

For additional information visit:

US : http://www.dukcorp.com/av

Email : avsales@dukcorp.com

Phone : 800-676-2485

LCD panels are inherently susceptible to pixel defects.

For additional information regarding pixel data, please contact Dukane.

The specifications are subject to change without notice.

E-60

Image 60
Contents Models 8805 Safety Cautions Fire and Shock Precautions Lamp ReplacementWhats in the Box? Table of Contents Features youll enjoy IntroductionIntroduction to the Projector Part Names of the Projector Attaching the lens capCarrying the Projector Top Features SelectTerminal Panel Features Part Names of the Remote Control On the screen using the SelectSelect Battery Installation Remote Control PrecautionsOperating Range for Wireless Remote Control Using the Remote Control in Wired OperationInstallation and Connections Setting Up the Screen and the ProjectorSelecting a Location Wide Tele When Viewing a DVI Digital Signal Connecting Your PC or Macintosh ComputerConnecting to RGB 2 in connectors Connecting Your PC with a DVI ConnectorConnecting an External Monitor To connect Scart output RGBTo RGB Commercially available FemaleConnecting Your DVD Player Optional 15-pin-to-RCA female×3 cable ADP-CV1Audio Equipment Connecting Your VCR or Laser Disc Player Connecting the Supplied Power CableVideo cable not supplied Audio equipment VCR/ Laser disc playerProjecting AN Image Basic Operation Turning on the ProjectorPress the Enter button to execute the selection Adjusting the Picture Size and Position Adjust the Tilt FootSelecting a Source Selecting the computer or video sourceWhen using the remote control or cabinet buttons Using Auto FocusFocus Use the Focus Button +/- to obtain the best focusWhen using the USB connected to the projector Press the Enter button Screen Use the SelectConfirmation screen is displayed Turning Up or Down Volume Using the Laser PointerAdjusting the Image Using Auto Adjust Optimizing RGB Picture AutomaticallySetting the function switch Turning off the ProjectorTo turn off the projector Convenient Features Using the Remote Mouse FunctionExecuting the Auto 3D Reform feature Auto 3D ReformSetting Screen of Auto 3D Reform AdjustmentUsing the Pointer Freezing a PictureGetting the On-line Help Using a USB Mouse Using the USB HUB Function Operate the Menus using the USB mouseUsing the middle button on the mouse Changing Background Logo Making Freehand Drawings on a Projected Image ChalkBoardUSB Memory Device or USB Memory Card Reader Support Pen Eraser Drive DragUsing the Viewer Making the Most out of the Viewer FunctionWhen the tool bar is not displayed Operating the Viewer Function from the Projector playbackProjecting slides Viewer Auto Play Mode Switching to Slides Directly from Other Input ModesViewing Digital Images PreparationsUsing the PC Card Files Fucntion PC Card Files Deleting Captured ImagesUsing ON-SCREEN Menu Using the MenusDefault Custom Menu items are Basic Menu OperationMenu tree Advanced MenuOperation Mode Select Default Source SelectCommunication Speed WEP Menu Elements Highlight Title bar Tab Check box Drag Tool barEntering Alphanumeric Characters by Using the Menu Menu Descriptions & FunctionsSource Select Entry Edit Command Picture not available for Viewer and LANSound Image OptionsPicture Management Projector Options Using Adapting Color Correction Wall Color Correction Palette Menu Setup User can adjust the image display functions Hori Resolution manuallyHttp server functions are not available during Standby mode Selecting Lamp Mode and Lamp Type Lamp Setting Selecting Aspect Ratio and Position for Screen Screen Selecting Auto FunctionsSetting LAN Mode Network Type required for wireless onlyWEP for Wireless only Nications may be monitored by someoneUses 64-bit datalength for secure transmission Pared to use of 64bit datalength encryptionSetting a Password StatusChanging the menu to Advanced Editing the custom menu EntryTo enable Security, use the Select SecurityTo delete PC card data you registered Returning to Factory Default ToolsHelp Maintenance Replacing the LampTo replace the lamp Cleaning Cleaning or Replacing the FilterCleaning the Cabinet and the Lens Reinstall the new filter cover CatchTroubleshooting Power IndicatorStatus Indicator Lamp IndicatorCommon Problems & Solutions Check These Items Image isn’t square toFor more information contact your dealer Page Specifications Model Number 8946 OpticalModel Number 8805 Optical Cabinet Dimensions Pin Assignments of D-Sub RGB Input ConnectorMini D-Sub 15 Pin Connector Pin No RGB Signal Analog YCbCr SignalCompatible Input Signal List Uxga 1600×1200 is supported for separate sync signal onlyPC Control Connector D-SUB 9P Using Software KeyboardPC Control Codes and Cable Connection Cable ConnectionOperation Using an Http Browser OverviewPreparation Before Use Handling of the Address for Operation via a BrowserPage Page Phone 762-4040 Orders 676-2485401-8805/8946-00