Dukane 8946 user manual Top Features, Select

Page 7

Top Features

11

10

9

8

5

6

4

3

2

12

13

14

7

1

1. POWER Button (ON / STAND BY)( )

Use this button to turn the power on and off when the main power is supplied and the projector is in standby mode.

NOTE: To turn on or off the projector, press and hold this button for a mini- mum of two seconds.

2. POWER Indicator

When this indicator is green, the projector is on; when this indicator is orange, it is in standby or idle mode. See the Power Indicator sec- tion on page E-57 for more details.

3. STATUS Indicator

If this light blinks red rapidly, it indicates that an error has occurred, the lamp cover is not attached properly or the projector has over- heated. If this light remains orange, it indicates that you have pressed a cabinet key while the Control Panel Key Lock is enabled. See the Status Indicator section on page E-57 for more details.

4.LAMP Indicator

If this light blinks red rapidly, it's warning you that the lamp has reached the end of its usable life. After this light appears, replace the lamp as soon as possible (See page E-55). If this is lit green continually, it indicates that the lamp mode is set to Eco. See the Lamp Indicator section on page E-57 for more details.

5.SOURCE Button

Use this button to select a video source such as a PC, VCR, DVD player, Viewer (PC card), or LAN.

Press and release this button quickly to display the Source List.

Each time this button is pressed for a minimum of ONE second, the input source will change as follows:

RGB1 → RGB2 → Video → S-Video → DVI (DIGITAL) → Viewer → RGB1 → ...

If no input signal is present, the input will be skipped.

6.AUTO ADJUST Button

Use this button to adjust Position-H/V and Pixel Clock/Phase for an optimal picture (See page E-22). Also press and hold this button for a minimum of 2 seconds to enable the Auto Focus or Auto Wall Color Correction function (See page E-49).

7.3D REFORM Button

Press this button to enter 3D Reform mode to correct the keystone (trapezoidal) distortion, and make the image square.

8.ZOOM Button (+/–) Zoom the lens in and out.

9.FOCUS Button (+/–) Adjust the lens focus.

10.MENU Button

Displays the menu.

11. SELECT

(+) (–) / Volume Buttons

:Use these buttons to select the menu of the item you wish to adjust. When no menus appear, these buttons work as a vol- ume control.

:Use these buttons to change the level of a selected menu item.

A press of the button executes the selection.When the menus or the Viewer tool bar is not displayed, these buttons can be used to select a slide, or to move the cursor in Folder List or Slide List.

When the pointer is displayed, these

buttons move the pointer.

12. ENTER Button

Executes your menu selection and activates items selected from the menu.

13. CANCEL Button

Press this button to exit "Menus". Press this button to return the ad- justments to the last condition while you are in the adjustment or setting menu.

14.PC CARD Access Indicator 1/2 Lights while accessing a PC card.

E-7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Models 8805 Safety Cautions Lamp Replacement Fire and Shock PrecautionsWhats in the Box? Table of Contents Introduction Features youll enjoyIntroduction to the Projector Attaching the lens cap Part Names of the ProjectorCarrying the Projector Select Top FeaturesTerminal Panel Features On the screen using the Select Part Names of the Remote ControlSelect Using the Remote Control in Wired Operation Battery InstallationRemote Control Precautions Operating Range for Wireless Remote ControlSetting Up the Screen and the Projector Installation and ConnectionsSelecting a Location Wide Tele Connecting Your PC with a DVI Connector When Viewing a DVI Digital SignalConnecting Your PC or Macintosh Computer Connecting to RGB 2 in connectorsCommercially available Female Connecting an External MonitorTo connect Scart output RGB To RGBOptional 15-pin-to-RCA female×3 cable ADP-CV1 Connecting Your DVD PlayerAudio Equipment VCR/ Laser disc player Connecting Your VCR or Laser Disc PlayerConnecting the Supplied Power Cable Video cable not supplied Audio equipmentTurning on the Projector Projecting AN Image Basic OperationPress the Enter button to execute the selection Selecting the computer or video source Adjusting the Picture Size and PositionAdjust the Tilt Foot Selecting a SourceUse the Focus Button +/- to obtain the best focus When using the remote control or cabinet buttonsUsing Auto Focus FocusPress the Enter button Screen Use the Select When using the USB connected to the projectorConfirmation screen is displayed Optimizing RGB Picture Automatically Turning Up or Down VolumeUsing the Laser Pointer Adjusting the Image Using Auto AdjustTurning off the Projector Setting the function switchTo turn off the projector Using the Remote Mouse Function Convenient FeaturesAuto 3D Reform Executing the Auto 3D Reform featureAdjustment Setting Screen of Auto 3D ReformFreezing a Picture Using the PointerGetting the On-line Help Operate the Menus using the USB mouse Using a USB Mouse Using the USB HUB FunctionUsing the middle button on the mouse Pen Eraser Drive Drag Changing Background LogoMaking Freehand Drawings on a Projected Image ChalkBoard USB Memory Device or USB Memory Card Reader SupportMaking the Most out of the Viewer Function Using the ViewerOperating the Viewer Function from the Projector playback When the tool bar is not displayedProjecting slides Viewer Preparations Auto Play ModeSwitching to Slides Directly from Other Input Modes Viewing Digital ImagesDeleting Captured Images Using the PC Card Files Fucntion PC Card FilesBasic Menu Operation Using ON-SCREEN MenuUsing the Menus Default Custom Menu items areAdvanced Menu Menu treeDefault Source Select Operation Mode SelectCommunication Speed WEP Highlight Title bar Tab Check box Drag Tool bar Menu ElementsMenu Descriptions & Functions Entering Alphanumeric Characters by Using the MenuSource Select Image Options Entry Edit CommandPicture not available for Viewer and LAN SoundPicture Management Projector Options Using Adapting Color Correction Wall Color Correction Palette Menu Setup Resolution manually User can adjust the image display functions HoriHttp server functions are not available during Standby mode Selecting Lamp Mode and Lamp Type Lamp Setting Selecting Auto Functions Selecting Aspect Ratio and Position for Screen ScreenNetwork Type required for wireless only Setting LAN ModePared to use of 64bit datalength encryption WEP for Wireless onlyNications may be monitored by someone Uses 64-bit datalength for secure transmissionEntry Setting a PasswordStatus Changing the menu to Advanced Editing the custom menuSecurity To enable Security, use the SelectTo delete PC card data you registered Tools Returning to Factory DefaultHelp Replacing the Lamp MaintenanceTo replace the lamp Reinstall the new filter cover Catch CleaningCleaning or Replacing the Filter Cleaning the Cabinet and the LensLamp Indicator TroubleshootingPower Indicator Status IndicatorImage isn’t square to Common Problems & Solutions Check These ItemsFor more information contact your dealer Page Model Number 8946 Optical SpecificationsModel Number 8805 Optical Pin No RGB Signal Analog YCbCr Signal Cabinet DimensionsPin Assignments of D-Sub RGB Input Connector Mini D-Sub 15 Pin ConnectorUxga 1600×1200 is supported for separate sync signal only Compatible Input Signal ListCable Connection PC Control Connector D-SUB 9PUsing Software Keyboard PC Control Codes and Cable ConnectionHandling of the Address for Operation via a Browser Operation Using an Http BrowserOverview Preparation Before UsePage Page Orders 676-2485 Phone 762-4040401-8805/8946-00
Top Page Image Contents