. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-10 Setup and Configuration
The Factory Default configuration settings never change and are always available to apply to the hub. When you select Factory Setting from the Main Menu the Factory Default configuration is loaded into the Current configuration. See Table
Displaying System Information
Use the Information command to display and modify system information about the hub, or for quick system identification. View a description of the system:
Figure 3-7. System Information Screen
QSystem Description – Identifies the hub
QSystem Uptime - Length of time the management agent has been running
QSystem Name –
QContact - Contact person for the system
QLocation - Specifies the area or location where the system resides