Compaq HB1004 manual Assigning Trap Managers, Invalid

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3-12Setup and Configuration

Assigning Trap Managers

Use the Trap Managers command from the Main Menu to modify current values for the following parameters:

Figure 3-9.Trap Managers Screen

QSNMP Community Names - The community strings authorized for trap management access. All community strings used for IP Trap Managers must be listed in this table.

‰Community Name - A community entry authorized for trap management access.

‰Access Management - access is restricted to read-only (RO) or read/write (RW).

‰Status - The status of the current entry can be set to VALID or

INVALID.

QIP Trap Managers - IP management stations selected to receive trap messages from the HB1004 agent.

‰IP Address - IP address of the management station.

‰Community Name - The community string required for trap management access.

‰Status - The status of the current entry can be set to VALID or

INVALID.