. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Chapter 2
Installation
This chapter provides information to help you prepare for and install the hub and connect the hub to the network.
Mounting the Hub
You can place this hub directly on a desktop or mount it in a rack. Before you start installing the hub, make sure you can provide the right operating environment, including power requirements, sufficient physical space, and proximity to other network devices you want to connect. Verify the following installation requirements:
QPower requirements: 100 to 240 VAC (+/- 10%) at 50 to 60 Hz (+/- 3 Hz). The hub’s power supply automatically adjusts to the input voltage.
QThe hub should be located in a cool, dry place with at least 10 cm (4 in.) of space at the front and back for ventilation.
QPlace the hub out of direct sunlight and away from heat sources or areas with a high amount of electromagnetic interference.
QIf you intend to mount the hub in a rack, make sure you have all the necessary mounting screws, brackets, and tools.
QCheck if network cables and connectors needed for installation are available.
Mounting the Hub on a Flat Surface
This hub can be placed anywhere there is enough flat space, such as on a table or desktop.
1.Stick the
2.Place the hub on a firm, flat surface.
3.Be sure you allow at least 2 inches (5 cm) on each side and 4 inches (10 cm) at the back of the hub for proper airflow.
Compaq HB1004