**
8.1 Automatic Search
Ifyour receiver is connected to the aerial and television, you can automatically search channels
withoutentering any other information.
1. Select MENU button.
2. Select Installation using the button,and press the
OK or button.
3. Select Automatic Search from Installation menu using the
button,and press the OK or button.
**
Search
Waitwhile the receiver searches for the channels, this may take a few minutes.
1. During operating search, the cursor is located at Stop
Therefore,if you press the OK button during
searching,the operation is stopped and the channels
founduntil then will be displayed.
2. If search operation is successfully completed, and the
channeldoes not exist, press the OK button and try to
resetthe search operation again if necessary.
3. You can delete unnecessary channels from the searched
channels.Select your desired channels to delete and press
theOK button. Then select Delete and press the OK
button.To delete all channels, select Select All to
selectall channels, select Delete, and press the OK
button.
4. When completing Channel Search and deleting
unnecessarychannels, select Save to save the changes.
**
**
8. InstallationGB 54
**
**
**
**
**
**
**
**
**
**
**
**
**
**