Compaq 3000 manual Update Firmware, Saved Configuration

RAID Array 3000 Storage Subsystem

Figure 4-2. Saved Configuration

.

4.2.2Update Firmware

CAUTION

If the systems disk is on the RA3000, firmware cannot be upgraded with SWCC. Establish a temporary sys- tem disk on a disk drive outside the RA3000 and pro- ceed with these instructions or follow the alternative shown in Section 4.2.2.2.

4.2.2.1Update Firmware Using SWCC

Start SWCC and choose SCSI or Network Connection. From the Storage menu (see Figure 4-3), select Controller, and then select Update Firmware.

Figure 4-3 Update Firmware Command

4-4 EK–SMCPQ–UG. C01