Compaq 3000 manual Replace Existing Controller, Remove Controller from Top Slot

RAID Array 3000 Storage Subsystem

4.2.5Replace Existing Controller

1.Replace the existing controller (see Figure 4-7 to remove) with the new control- ler.

Figure 4-7. Remove Controller from Top Slot

SHR-1062

NOTE

Ensure you install the new controller in the same slot as the existing controller removed in step 1 above. Do not leave the existing controller in the controller shelf while performing the following step.

2.Power up the system and proceed to the following section to restore the configu- ration on the new controller.

4-8 EK–SMCPQ–UG. C01