BOXLIGHT CP-324i user manual English

Page 41
41
After making sure that the projector is cool adequately, lightly wipe with gauze or a soft cloth.
If soiling is severe, dip soft cloth in water or a neutral cleaner dilute in water, and wipe lightly after wringing well. Then, wipe lightly with a soft, dry cloth.
Turn the projector off, and unplug the power cord. Allow the projector to cool sufficiently.
1.
2.
Caring for the cabinet and remote control
Incorrect care could have adverse influence such as discoloration, peeling paint, etc.
After making sure that the projector is cool adequately, lightly wipe the lens with a commercially available lens-cleaning wipe. Do not touch the lens
directly with your hand.
Turn the projector off, and unplug the power cord. Allow the projector to cool sufficiently.
1.
2.
Maintenance
Other care
WARNING ►Before caring, make sure the power switch is off and the power cable is not plugged in, and then allow the projector to cool sufficiently. The care in a high temperature state of the projector could cause a burn and/or malfunction to the projector.
►Never try to care for the inside of the projector personally. Doing is so dangerous.
►Avoid wetting the projector or inserting liquids in the projector. It could result in a fire, an electric shock, and and/or malfunction to the projector.
• Don’t put a container containing water, cleaner or chemicals near the projector.
• Don’t use aerosols or sprays.
CAUTION ►Please take right care of the projector according to the following. Incorrect care could cause not only an injury but adverse influence such as discoloration, peeling paint, etc.
• Do not use cleaner or chemicals other than those listed below.
• Do not polish or wipe with hard objects.
Inside of the projector
In order to ensure the safe use of your projector, please have it cleaned and inspected by your dealer about once every 2 years.
Caring for the lens
If the lens is flawed, soiled or fogged, it could cause deterioration of display quality. Please take care of the lens, being cautious of the handling.

ENGLISH

Image 41
Contents Trademark acknowledgment About this manualThank you for purchasing this projector Contents Preparations Projector featuresAbout contents of package CB/PB CR/PR ProjectorControl buttons Remote controlSetting up At 43 screen ArrangementAt 169 screen 169 DownElevator feet Elevator button Adjusting the projectors elevatorFilter cover’s knob About the filter cover for bottom-up useFilter cover To remove Filter cover for bottom-up useAbout Plug-and-Play capability Connecting your devicesExamples of connection with a computer Connecting to a monitor outputConnecting to a speaker with amplifier output CB/PB Examples of connection with a VCR/DVD playerCR/PR AC inlet Connector of the power cord Connecting power supplyPutting batteries Remote controlApprox meters 30º 30º Using the remote controlTurning on the power Power on/offTurning off the power PowerSelecting an input signal Adjusting the volumeOperating Temporarily muting the soundAdjusting the zoom and focus Searching an input signal At a RGB signal Normal  43   At a video signal /no signal 43  169  SmallAdjusting the position Using the automatic adjustment feature At a RGB signal  At a video signalTemporarily blanking the screen Using the magnify featureFreezing the screen Operating the computer screen Available function Remote control operationUSB mouse and keyboard control Move pointerUsing the menu function Multifunctional settingsEasy Menu Easy Menu Gamma Picture MenuHigh  Middle  LOW  Custom Picture MenuColor Temp SecamProgressive TV  Film  Turn OFFLOAD1  LOAD2  LOAD3  LOAD4 SAVE4 SAVE3  SAVE2  SAVE1Image Menu PhaseOver Scan PositionAt a video signal Auto AdjustImage Menu SizeComponent  Scart RGB Input MenuAuto  Ntsc  PAL  Secam Video FormatInformation Input MenuVolume Setup MenuNormal  Whisper Normal  Hinvert  Vinvert  H&VINVERTMenu Position Screen MenuOSD Bright BlankStart UP Screen MenuMy Screen My Screen LockAuto in Progress while automatically adjusting Using the buttons / turns on/off the message functionMessage No Input is Detected Sync is OUT of RangeOption Menu Reset  CancelSearch Auto OFFFactory Reset Service GhostOption Menu FAN SpeedLamp MaintenanceLamp Case of replacement by yourselfClaws Tabs Center point of claws ClawsAir filter Apply a vacuum cleaner to the air filter and filter coverEnglish Related messages There is no input signalInternal portion temperature is rising Message Description Related messagesRegarding the indicator lamps It is time to clean the air filter Regarding the indicator lampsCooling fan is not operating There is a possibility that the interior portionPower switch is not set to the on position Electrical power cord is not pluggedPhenomena that may easily be mistaken for machine defects These has not been properly fixedPhenomena that may easily be mistaken for machine defects RGB input Video input SpecificationRGB output Communication portSpecifications