BOXLIGHT CP-324i user manual Option Menu, FAN Speed, Service Ghost, Factory Reset

Page 37

Multifunctional settings

OPTION Menu (continued)

	Item	Description
		The ﬁlter time is the time counted after the last resetting. It is shown
		in the OPTION menu as the use time of the air ﬁlter.
		Pressing the RESET button on the remote control for about 3
		seconds displays a dialog. To reset the ﬁlter time, select the RESET
	FILTER TIME	using the button ▲.
	FILTER TIME	RESET  CANCEL
		RESET  CANCEL
		• Please reset the ﬁlter time only when you have cleaned or
		replaced the air ﬁlter, for correct messages about the air ﬁlter.
		• About the caring the air ﬁlter, please see the section "Air ﬁlter" (
		40).
		Selecting this item displays the SERVICE menu.
		Select an item using the buttons ▲/▼, and press the button ► or
		the ENTER button on the remote control to progress.
		FAN SPEED  FACTORY RESET  GHOST
		FAN SPEED
		Using the buttons ▲/▼ switches the rotation speed of the cooling
		fans. The HIGH is the mode for use at highlands etc. Note that the
		projector is noisier when the HIGH is selected.
		HIGH  NORMAL
	SERVICE	GHOST
	SERVICE	1. Select a color element of ghost using the buttons ▲/▼ and press

		the cursor button ► or the ENTER button on the remote control
		to progress.
		2. Adjust the selected element using the buttons ▲/▼ to disappear
		ghost.
		FACTORY RESET
		Selecting RESET using the button ▲ performs this function. By this
		function, all the items in all of menu will collectively return to the
		initial setting. Note that the items LAMP TIME, FILTER TIME and
		LANGUAGE are not reset.
		RESET  CANCEL

ENGLISH

37

Image 37

Contents Thank you for purchasing this projector About this manualTrademark acknowledgment Contents About contents of package Projector featuresPreparations CB/PB CR/PR ProjectorControl buttons Remote controlSetting up At 43 screen ArrangementAt 169 screen 169 DownElevator feet Elevator button Adjusting the projectors elevatorFilter cover’s knob About the ﬁlter cover for bottom-up useFilter cover To remove Filter cover for bottom-up useAbout Plug-and-Play capability Connecting your devicesConnecting to a speaker with ampliﬁer output Connecting to a monitor outputExamples of connection with a computer CR/PR Examples of connection with a VCR/DVD playerCB/PB AC inlet Connector of the power cord Connecting power supplyPutting batteries Remote controlApprox meters 30º 30º Using the remote controlTurning on the power Power on/offTurning off the power PowerSelecting an input signal Adjusting the volumeOperating Temporarily muting the soundAdjusting the zoom and focus Searching an input signal At a RGB signal Normal  43   At a video signal /no signal 43  169  SmallAdjusting the position Using the automatic adjustment feature At a RGB signal  At a video signalFreezing the screen Using the magnify featureTemporarily blanking the screen Operating the computer screen Available function Remote control operationUSB mouse and keyboard control Move pointerUsing the menu function Multifunctional settingsEasy Menu Easy Menu Gamma Picture MenuHigh  Middle  LOW  Custom Picture MenuColor Temp SecamProgressive TV  Film  Turn OFFLOAD1  LOAD2  LOAD3  LOAD4 SAVE4 SAVE3  SAVE2  SAVE1Image Menu PhaseOver Scan PositionAt a video signal Auto AdjustImage Menu SizeComponent  Scart RGB Input MenuAuto  Ntsc  PAL  Secam Video FormatInformation Input MenuVolume Setup MenuNormal  Whisper Normal  Hinvert  Vinvert  H&VINVERTMenu Position Screen MenuOSD Bright BlankStart UP Screen MenuMy Screen My Screen LockAuto in Progress while automatically adjusting Using the buttons / turns on/off the message functionMessage No Input is Detected Sync is OUT of RangeOption Menu Reset  CancelSearch Auto OFFFactory Reset Service GhostOption Menu FAN SpeedLamp MaintenanceLamp Case of replacement by yourselfClaws Tabs Center point of claws ClawsAir ﬁlter Apply a vacuum cleaner to the air ﬁlter and ﬁlter coverEnglish Internal portion temperature is rising There is no input signalRelated messages Message Description Related messagesRegarding the indicator lamps It is time to clean the air ﬁlter Regarding the indicator lampsCooling fan is not operating There is a possibility that the interior portionPower switch is not set to the on position Electrical power cord is not pluggedPhenomena that may easily be mistaken for machine defects These has not been properly ﬁxedPhenomena that may easily be mistaken for machine defects RGB input Video input SpeciﬁcationRGB output Communication portSpeciﬁcations