BOXLIGHT CP-324i user manual Connecting power supply, AC inlet Connector of the power cord

Page 13

Setting up

Connecting power supply

WARNING ►Please use extra caution when connecting the power cord as incorrect or faulty connections may result in ﬁre and/or electrical shock.

•Only use the power cord that came with the projector. If it is damaged, contact your dealer to newly get correct one.

•Only plug the power cord into an outlet rated for use with the power cord's speciﬁed voltage range.

•Never modify the power cord. Never attempt to defeat the ground connection of the three-pronged plug.

AC inlet

Connector of the power cord

1. Connect the connector of the power cord to the AC inlet of the projector.

2. Firmly plug the power cord's plug into the outlet.

ENGLISH

Image 13

Contents Thank you for purchasing this projector About this manualTrademark acknowledgment Contents About contents of package Projector featuresPreparations CB/PB CR/PR ProjectorControl buttons Remote controlSetting up At 43 screen ArrangementAt 169 screen 169 DownElevator feet Elevator button Adjusting the projectors elevatorFilter cover’s knob About the ﬁlter cover for bottom-up useFilter cover To remove Filter cover for bottom-up useAbout Plug-and-Play capability Connecting your devicesConnecting to a speaker with ampliﬁer output Connecting to a monitor outputExamples of connection with a computer CR/PR Examples of connection with a VCR/DVD playerCB/PB AC inlet Connector of the power cord Connecting power supplyPutting batteries Remote controlApprox meters 30º 30º Using the remote controlTurning on the power Power on/offTurning off the power PowerSelecting an input signal Adjusting the volumeOperating Temporarily muting the soundAdjusting the zoom and focus Searching an input signal At a RGB signal Normal  43   At a video signal /no signal 43  169  SmallAdjusting the position Using the automatic adjustment feature At a RGB signal  At a video signalFreezing the screen Using the magnify featureTemporarily blanking the screen Operating the computer screen Available function Remote control operationUSB mouse and keyboard control Move pointerUsing the menu function Multifunctional settingsEasy Menu Easy Menu Gamma Picture MenuHigh  Middle  LOW  Custom Picture MenuColor Temp SecamProgressive TV  Film  Turn OFFLOAD1  LOAD2  LOAD3  LOAD4 SAVE4 SAVE3  SAVE2  SAVE1Image Menu PhaseOver Scan PositionAt a video signal Auto AdjustImage Menu SizeComponent  Scart RGB Input MenuAuto  Ntsc  PAL  Secam Video FormatInformation Input MenuVolume Setup MenuNormal  Whisper Normal  Hinvert  Vinvert  H&VINVERTMenu Position Screen MenuOSD Bright BlankStart UP Screen MenuMy Screen My Screen LockAuto in Progress while automatically adjusting Using the buttons / turns on/off the message functionMessage No Input is Detected Sync is OUT of RangeOption Menu Reset  CancelSearch Auto OFFFactory Reset Service GhostOption Menu FAN SpeedLamp MaintenanceLamp Case of replacement by yourselfClaws Tabs Center point of claws ClawsAir ﬁlter Apply a vacuum cleaner to the air ﬁlter and ﬁlter coverEnglish Internal portion temperature is rising There is no input signalRelated messages Message Description Related messagesRegarding the indicator lamps It is time to clean the air ﬁlter Regarding the indicator lampsCooling fan is not operating There is a possibility that the interior portionPower switch is not set to the on position Electrical power cord is not pluggedPhenomena that may easily be mistaken for machine defects These has not been properly ﬁxedPhenomena that may easily be mistaken for machine defects RGB input Video input SpeciﬁcationRGB output Communication portSpeciﬁcations