BOXLIGHT CP-324i user manual Screen Menu, Start UP, My Screen Lock

Page 34

Multifunctional settings

SCREEN Menu (continued)

Item

Description

		Using the buttons ▲/▼ switches the mode the start up screen.
		The start up screen is the screen displayed when no signal or an
		unsuitable signal is detected.
		MyScreen  ORIGINAL  TURN OFF
		MyScreen is the screen you can register a desired screen.
		ORIGINAL screen is the existing standard screen. When the TURN
	START UP	OFF is selected, the BLUE screen is used.
		• To avoid remaining as an afterimage, the MyScreen and the
		ORIGINAL screens will change to the BLANK screen after several
		minutes. If also the BLANK screen is the MyScreen or ORIGINAL, it
		will change to the BLACK screen.
		• For the MyScreen, please refer to the item MyScreen below.
		About the BLUE, BLACK and BLANK screens, please refer to the
		item BLANK (33).
		This item functions for capturing the MyScreen of the blank screen
		and the start up screen. Please execute displaying the input
		including the picture you want to capture.
		1. Selecting this item displays a dialog titled “MyScreen”. It will ask
		you if you start capturing the picture from the current screen.
		Please wait for the target picture to be displayed, and press the
		ENTER button on the remote control when the picture is display.
		The picture will freeze and the frame for capturing appears.
		To stop performing, press the RESET or ESC button on the
		remote control.
	My Screen	2. Using the buttons ◄/►/▲/▼ adjust the frame position. Please
	My Screen	move the frame to the position of the picture which you want to

		use.
		To start registration, press the ENTER button on the remote
		control.
		To restore the screen and return to the previous dialog, press the
		RESET or ESC button on the remote control.
		Registration takes several minutes. When the registration is
		completed, the registered screen and the message “MyScreen
		registration is ﬁnished.” are displayed for several seconds. If the
		registration failed, the message “A capturing error has occurred.
		Please try again.” is displayed.
		Using the buttons ▲/▼ turns on/off the MyScreen lock function.
	My Screen Lock	TURN ON  TURN OFF
	My Screen Lock	When the TURN ON is selected, the item MyScreen cannot be
		When the TURN ON is selected, the item MyScreen cannot be
		performed. Use this function for protecting the current MyScreen.

34

Image 34

Contents Thank you for purchasing this projector About this manualTrademark acknowledgment Contents About contents of package Projector featuresPreparations Projector CB/PB CR/PRRemote control Control buttonsSetting up At 169 screen ArrangementAt 43 screen 169 DownAdjusting the projectors elevator Elevator feet Elevator buttonFilter cover To remove About the ﬁlter cover for bottom-up useFilter cover’s knob Filter cover for bottom-up useConnecting your devices About Plug-and-Play capabilityConnecting to a speaker with ampliﬁer output Connecting to a monitor outputExamples of connection with a computer CR/PR Examples of connection with a VCR/DVD playerCB/PB Connecting power supply AC inlet Connector of the power cordRemote control Putting batteriesUsing the remote control Approx meters 30º 30ºTurning off the power Power on/offTurning on the power PowerOperating Adjusting the volumeSelecting an input signal Temporarily muting the sound At a RGB signal Normal  43  Searching an input signalAdjusting the zoom and focus  At a video signal /no signal 43  169  Small At a RGB signal Using the automatic adjustment featureAdjusting the position  At a video signalFreezing the screen Using the magnify featureTemporarily blanking the screen USB mouse and keyboard control Available function Remote control operationOperating the computer screen Move pointerMultifunctional settings Using the menu functionEasy Menu Easy Menu Picture Menu GammaColor Temp Picture MenuHigh  Middle  LOW  Custom SecamLOAD1  LOAD2  LOAD3  LOAD4 TV  Film  Turn OFFProgressive SAVE4 SAVE3  SAVE2  SAVE1Over Scan PhaseImage Menu PositionImage Menu Auto AdjustAt a video signal SizeAuto  Ntsc  PAL  Secam Input MenuComponent  Scart RGB Video FormatInput Menu InformationNormal  Whisper Setup MenuVolume Normal  Hinvert  Vinvert  H&VINVERTOSD Bright Screen MenuMenu Position BlankMy Screen Screen MenuStart UP My Screen LockMessage Using the buttons / turns on/off the message functionAuto in Progress while automatically adjusting No Input is Detected Sync is OUT of RangeSearch Reset  CancelOption Menu Auto OFFOption Menu Service GhostFactory Reset FAN SpeedMaintenance LampClaws Case of replacement by yourselfLamp Tabs Center point of claws ClawsApply a vacuum cleaner to the air ﬁlter and ﬁlter cover Air ﬁlterEnglish Internal portion temperature is rising There is no input signalRelated messages Related messages Message DescriptionRegarding the indicator lamps Cooling fan is not operating Regarding the indicator lampsIt is time to clean the air ﬁlter There is a possibility that the interior portionPhenomena that may easily be mistaken for machine defects Electrical power cord is not pluggedPower switch is not set to the on position These has not been properly ﬁxedPhenomena that may easily be mistaken for machine defects RGB output SpeciﬁcationRGB input Video input Communication portSpeciﬁcations