BOXLIGHT CP-324i user manual Image Menu, Over Scan, Position, Phase

Multifunctional settings

IMAGE Menu

With the IMAGE menu, items shown in the table below can be performed.

Select an item using the cursor buttons ▲/▼ on the projector or remote control, and press the cursor button ► on the projector or remote control, or the ENTER button on the remote control to progress. Then perform it referring to the following table.

MENU [RGB]		:SELECT
PICTURE	ASPECT	4:3
IMAGE	OVER SCAN	95
INPUT	V POSITION	25
SETUP	H POSITION	142
SCREEN	H PHASE	16
OPTION	H SIZE	1344
EASY MENU	AUTO ADJUST

Item

Description

	Using the buttons ▲/▼ switches the mode for aspect ratio.
	At a RGB signal
	4:3  16:9  NORMAL
	At a video signal / no signal
ASPECT	4:3  16:9  SMALL
	• The NORMAL mode keeps the original aspect ratio of the signal.
	• At a HDTV signal of 1125i (1080i) or 750p (720p) of COMPONENT
	VIDEO input, this item can't be selected.
	• Performing the automatic adjustment initializes the aspect ratio
	setting.
	Using the buttons ▲/▼ adjusts the over-scan ratio.
OVER SCAN	Large (It reduces picture)  Small (It magnifies picture)
	• This item can be selected only at a video signal.
	• When this adjustment is too large, certain degradation may appear
	at the frame area of the picture. In such a case, please adjust small.
V POSITION	Using the buttons ▲/▼ adjusts the vertical position.
	Up  Down
H POSITION	Using the buttons ▲/▼ adjusts the horizontal position.
	Left  Right
	Using the buttons ▲/▼ adjusts the horizontal phase to eliminate
	flicker.
H PHASE	Right  Left
	• This item can be selected only at a RGB signal or a component
	video signal.

28