BOXLIGHT CP-14t manual To the Owner, Safety Precautions, Risk of Electric Shock Do not Open

Page 2

INFORMATION TO THE USER

NOTE : This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

TO THE OWNER

As the owner of a new Boxlight CP-14t, you are probably eager to try out your new projector. Before you do, we suggest that your spend a little time reading this manual to familiarize yourself with the operating procedures so that you will receive maximum satisfaction from the many features included in your new projector.

This owner's manual will acquaint you with your projector's features. Reading it will help us too. Through the years, we have found that many service requests were not caused by problems with our projectors. They were caused by problems that could have been prevented, if the owner had followed the instructions in the manual.

You can often correct operating problems yourself. If your projector fails to work properly, see "TROUBLESHOOTING" section on pages 36 ~ 37 and try the solution marked for each problem.

SAFETY PRECAUTIONS

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

This BOXLIGHT CP-14t has a grounding-type AC line plug. This is a safety feature to be sure that the plug will fit into the power outlet. Do not try to defeat this safety feature.

This projector produces intense light from the projection lens. Do not stare directly into the lens as possible eye damage could result. Be especially careful that children do not stare directly into the beam. This projector should be set in the way indicated. If not, It may result in fire hazard.

If the projector will not be used for an extended time, unplug the projector from the power outlet.

READ AND KEEP THIS OWNER'S MANUAL FOR LATER USE.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE EXCEPT LAMP REPLACEMENT. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT.

THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS IN THE OWNER'S MANUAL WITH THIS UNIT.

2

Image 2
Contents Boxlight CP-14t Risk of Electric Shock Do not Open Safety PrecautionsTo the Owner Important Safety Instructions GroundTable of Contents Features and Design CompatibilityPreparation Name of Each Part of the ProjectorPositioning the Projector SETTING-UP the ProjectorAdjustable Feet Height H2Preparation Connecting the AC Power Cord VentilationPreparation Moving the Projector Connecting the Projector Terminals of the ProjectorVideo Cable Connecting to the Video EquipmentConnecting the Projector Connecting to the IBM-COMPATIBLE Computer IBM-COMPATIBLE Computers VGA / Svga / XGA / SxgaControl Port Audio Audio OUT Monitor OUT Serial Computer Connection to the Macintosh Computer Macintosh Computers VGA / Svga / XGA / SxgaControl Port Audio Audio OUT Monitor OUT ComputerOperation of the Remote Control Before OperationRemote Control Batteries Installation Operating Range of the Remote ControlTOP Controls and Indicators Flow of ON-SCREEN Menu HOW to Operate ON-SCREEN MenuOperating ON-SCREEN Menu Before Operation Menu BAR Turning on the Projector Basic OperationTurning on / OFF the Projector Turning off the ProjectorBasic Operation Adjusting the PictureNo Show Function ZoomMenu Operation Sound AdjustmentDirect Operation Selecting Computer System Computer ModeSelecting Computer Mode Automatic Multiscanning systemPC Adjustment Compatible Computer Specifications MAC LC13Picture Image Adjustment Adjust Picture Image ManuallyPosition Auto Image FunctionNormal Function Picture Position Adjustment Picture Screen AdjustmentSelecting Color System Video ModeSelecting Video Mode Regular Adjusting the Picture ImageColor Tint Contrast Brightness Sharpness WideSelecting Language SettingSetting Menu Controlling Wireless Mouse Operating Wireless MouseInstallation AppendixAIR Filter Care and Cleaning MaintenanceTemperature Warning Indicator Cleaning the Projection LensLamp Replacement Monitor Timer Lamp Replacement IndicatorLamp Replacement Lamp Replacement Monitor Timer belowTroubleshooting Maximum operating range is 16.4 feet 5m Check the mouse setting on your computerCheck the batteries Turn the projector on before you turn on the computerTechnical Specifications Optional Parts Limited Warranty