BOXLIGHT CP-14t manual Basic Operation, Turning on / OFF the Projector, Turning on the Projector

BASIC OPERATION

TURNING ON / OFF THE PROJECTOR

Turning on the Projector

1	Complete the peripheral connections (with Computer, VCR, etc.)
	before turning on the projector. (Refer to "CONNECTING TO
	THE PROJECTOR" on Pages 10~15 for connecting that
	equipment.
2	Connect the projector's AC power cord into a wall outlet. The
	LAMP POWER indicator lights RED, and the READY indicator
	lights GREEN.
3	Press the power ON-OFF button on the Remote Control Unit or on
	the Top Control to ON. The LAMP POWER indicator dims, and

the Cooling Fans start to operate. The Preparation Display appears on the screen and the count-down starts. The signal from the source appears after 30 seconds.

30

The Preparation Display disappears after 30 seconds.

Turning off the Projector

1	Press the power ON-OFF button on the Remote Control Unit or on
	the Top Control, and the message "Power off?" appears on the
	screen.
2	Press the power ON-OFF button again to turn off the projector.
	The LAMP POWER indicator lights bright and the READY
	indicator turns off. The Cooling Fans operate for 90 seconds after
	the projector is turned off. (During this "Cooling Down" period, this
	appliance cannot be turned on.)
3	When the cooling the projector has finished, the READY indicator
	turns to green again and you can turn the projector on. To power

down completely, disconnect the AC power cord.

Power off?

The message disappears after 4 seconds.

TO MAINTAIN THE LIFE OF THE LAMP, ONCE YOU TURN IT ON, WAIT AT LEAST 5 MINUTES BEFORE TURNING IT OFF.

When the TEMPERATURE WARNING indicator flashes red, the projector is automatically turned off. Wait at least 5 minutes before turning the projector on again.

If the TEMPERATURE WARNING indicator continues to flash, follow procedures below:

1.Disconnect the AC power cord from the AC outlet.

2.Check the air filters for dust accumulation.

3.Clean the Air Filter. (See "AIR FILTER CARE AND CLEANING" section on page 33.)

4.Press the power ON-OFF button to ON.

If the TEMPERATURE WARNING indicator still continues to flash, call Boxlight at 1-800-762-5757 or 360- 779-7901.

NOTE : The Cooling Fan may work for cooling while the projector is turned off. When the Cooling Fan is working, TEMPERATURE WARNING INDICATOR flashes red.

21