BOXLIGHT CP-14t manual Selecting Video Mode, Selecting Color System

Page 30

VIDEO MODE

SELECTING VIDEO MODE

Direct Operation

Select VIDEO mode by pressing the MODE button on the Top Control or the Remote Control Unit.

Menu Operation

Press the MENU button and the ON-SCREEN MENU will appear.

Press the POINT LEFT/RIGHT buttons to select Video and press the SELECT button.

Video

Computer

SELECTING COLOR SYSTEM

1

Press the MENU button and the ON-SCREEN MENU will appear.

Press the POINT LEFT/RIGHT buttons to select SYSTEM and

 

press the SELECT button. Another dialog box VIDEO SYSTEM

 

Menu will appear. (The display also appears by pressing the

 

SYSTEM button on the Top Control or the Remote Control Unit.)

2

Press the POINT DOWN button and a red-arrow icon will appear.

 

Move the arrow to "Auto", and then press the SELECT button.

Auto

The projector automatically detects the incoming Video system, and adjusts itself to optimize its performance.

When the Video System is PAL-M select the system manually.

PAL / SECAM / NTSC / NTSC4.43 / PAL-M

If the projector cannot reproduce the proper video image, it is required to select a specific broadcast signal format among PAL, SECAM, NTSC, NTSC 4.43, or PAL-M.

This box indicates the system being selected.

30

Image 30
Contents Boxlight CP-14t Safety Precautions To the OwnerRisk of Electric Shock Do not Open Important Safety Instructions GroundTable of Contents Features and Design CompatibilityPreparation Name of Each Part of the ProjectorPositioning the Projector SETTING-UP the ProjectorAdjustable Feet Height H2Preparation Connecting the AC Power Cord VentilationPreparation Moving the Projector Connecting the Projector Terminals of the ProjectorConnecting to the Video Equipment Connecting the ProjectorVideo Cable Connecting to the IBM-COMPATIBLE Computer IBM-COMPATIBLE Computers VGA / Svga / XGA / SxgaControl Port Audio Audio OUT Monitor OUT Serial Computer Connection to the Macintosh Computer Macintosh Computers VGA / Svga / XGA / SxgaControl Port Audio Audio OUT Monitor OUT ComputerOperation of the Remote Control Before OperationRemote Control Batteries Installation Operating Range of the Remote ControlTOP Controls and Indicators HOW to Operate ON-SCREEN Menu Operating ON-SCREEN MenuFlow of ON-SCREEN Menu Before Operation Menu BAR Turning on the Projector Basic OperationTurning on / OFF the Projector Turning off the ProjectorBasic Operation Adjusting the PictureNo Show Function ZoomSound Adjustment Direct OperationMenu Operation Selecting Computer System Computer ModeSelecting Computer Mode Automatic Multiscanning systemPC Adjustment Compatible Computer Specifications MAC LC13Picture Image Adjustment Adjust Picture Image ManuallyAuto Image Function Normal FunctionPosition Picture Position Adjustment Picture Screen AdjustmentVideo Mode Selecting Video ModeSelecting Color System Regular Adjusting the Picture ImageColor Tint Contrast Brightness Sharpness WideSetting Setting MenuSelecting Language Controlling Wireless Mouse Operating Wireless MouseInstallation AppendixAIR Filter Care and Cleaning MaintenanceTemperature Warning Indicator Cleaning the Projection LensLamp Replacement Monitor Timer Lamp Replacement IndicatorLamp Replacement Lamp Replacement Monitor Timer belowTroubleshooting Maximum operating range is 16.4 feet 5m Check the mouse setting on your computerCheck the batteries Turn the projector on before you turn on the computerTechnical Specifications Optional Parts Limited Warranty