Black Box LC-XE10 Computer Input, Computer System Selection, Auto, Mode, PC System Menu

Page 26

Computer Input

Computer System Selection

This projector can detect most of the current computer systems with the Multi-scan system and the Auto PC adjustment function provided in the projector. When selecting computer input, the projector automatically displays the most proper image for the input signal. One of the following four displays appears on the system menu icon. If the projector does not tune the input signal and the projected image is not displayed properly, or when you wish to adjust it manually, perform manual adjustment as described on page 28 and 29.

Auto

When the projector cannot recognize the connected PC System Menu

signal as PC system provided in this projector, the Auto

 

 

PC Adjustment function operates to adjust the projector

 

and the message “Auto” is displayed in the PC System

 

Menu icon. When the image is not provided properly,

 

manual adjustment is required. (p28, 29)

 

There is no signal input from the connected computer.

– – – –

Check the connection of the computer and see if the

 

 

projector is set correctly.

 

(See “Troubleshooting” on page 47.)

 

User preset adjustment in Computer Adjustment.

Mode 1

Adjustment data can be stored in Mode 1 - 5. (page 28,

 

 

29.)

 

Computer systems provided in the projector. The

SVGA 1

projector chooses a proper system and displays it.

 

The Auto PC Adjustment func- tion operates to adjust the pro- jector.

*Mode 1 and SVGA 1 are examples.

PC system can also be selected manually if some PC systems appear on the On-Screen Menu.

1

Press the MENU button and the On-Screen Menu will appear.

Press the Point Left/Right buttons to move the red frame

 

pointer to the PC System Menu icon.

2

Press the Point Down button to move the red arrow pointer to

 

the system that you want to set, and then press the SELECT

button.

PC System Menu

The PC System Menu icon displays the system being selected.

The systems on this dialog box can be selected.

Custom Mode (1~5) set in the

PC Adjust Menu. (p28, 29)

26

Page 25 Page 27
Image 26
Page 25 Page 27
Contents Model LC-XE10 Table of Contents To the Owner Risk of Electric Shock Do not OpenSafety Instructions Voor de klanten in NederlandAir Circulation Safety InstructionsInstalling the Projector in Proper Position Moving the ProjectorCompliance Federal Communication Commission NoticeFor the U.S.A. and Canada ComplianceFor Continental Europe 200 240 V ACFeatures and Design Part Names and Functions Front Back BottomPart Names and Functions TerminalTop 1!2Remote Control Zoom FreezeLaser Pointer Function Pointer FunctionRemote Control Code Wireless Mouse OperationRemote Control Operating Range Remote Control Batteries InstallationPositioning the Projector InstallationAdjustable Feet Terminals Projector InstallationConnecting to a Computer Connecting to Video Equipment Video Source exampleTurning Off the Projector Basic OperationTurning On the Projector Keystone Adjustment Zoom AdjustmentFocus Adjustment Basic OperationKeystone correction Corner Auto Set Up FunctionPicture Freeze Function No Show Function Timer FunctionSound Adjustment Direct OperationTop Control Remote ControlOn-Screen Menu On-Screen MenuMenu Bar Computer Input Input Source SelectionAuto Computer InputComputer System Selection ModeAuto PC Adj Computer Adjustment AutoTo store adjustment data Computer Adjustment Manual Display area To store adjustment data ResetMode free To clear adjustment dataReal Image Level SelectionStandard Image button Standard RealImage Level Adjustment Screen Size Adjustment Pb/Cb, Pr/Cr Video InputInput Source Selection Video, S-Video, Y, Pb/Cb, Pr/Cr RGB Scart Video InputInput Source Selection RGB Scart 21-Pin Input button Computer Video Computer 2 buttonComponent Video System SelectionVideo or S-Video AV System Menu Video or S-VideoCinema Image button Standard CinemaProgressive ColorTint Resets all adjustment to their previous figure Setting SettingSetting On start Power managementLamp mode PointerProjector mode To change the code for the remote controlWireless Mouse mode To change the code for the projectorThen check the items below Maintenance and CleaningProjector is shut down and the Warning indicator lights red Cleaning the Projection Lens Maintenance and CleaningCleaning the Air Filters Cleaning the Projector CabinetLamp Replacement Reset the Lamp replace counterLamp Handling Precautions Lamp Replace CounterTroubleshooting AppendixAppendix Indicators and Projector Condition Projector ConditionMenu Tree PC AdjustImage Adjust Screen InputImage Select System SettingImage Adjust SoundKHz Compatible Computer SpecificationsFreq Technical Specifications Terminal DVI-I Pin Configuration Configurations of TerminalsTerminal HDB15-PIN Pin Configuration Optional Parts Attaching the Lens Cover To lock the projector with USB key Key registrationDeleting key registration Off Projector is not locked with USB Key On1Appendix Appendix Key to better communications Canada
Top Page Image Contents